IEC 61275Applicable to a portable or transportable photon spectrometry assembly using a high purity germanium (HPGe) detector to survey, in situ, generally at 1 m above ground level, areas in the environment for discrete radionuclides. This standard specifies for such an assembly the general(...)
IEC 61285Describes the physical requirements for the safe operation of the process analyser measuring system installed in an AH in order to ensure its protection against fire, explosion and health hazards. This standard extends beyond IEC 60079-16 to include houses with Zone 2 interiors and to apply to(...)
IEC 61300-3-47IEC 61300-3-47:2014(E) describes a procedure to measure the end face geometry of a spherically polished ferrule or connector. Within this standard the words “ferrule” and “connector” can be used interchangeably.
IEC 61301Defines a data-busing technique that is optimized for the class of applications for which NIM modules are typically utilized. Will be of use to both designers and users of NIM equipment.
IEC 61304Provides the user with a means of verifying the performance of typical liquid-scintillation courting systems.
IEC 61310-1Specifies requirements for visual, acoustic and tactile methods of indicating safety-related information, at the human-machine interface and to exposed persons. It specifies a system of colours, safety signs, markings and other warnings, intended for use in the indication of hazardous(...)
IEC 61310-2General rules on marking for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections.
IEC 61310-3Specifies safety-related requirements for actuators, operated by the hand or by other parts of the human body, at the human-machine interface. It gives general requirements for the standard direction of movement for actuators; the arrangement of an actuator in relation to other actuators; the(...)
IEC 61318Provides elements for product conformity assessment. Critical defects on tools, devices and equipment for live working are not acceptable. Major defects on tools, devices and equipment for live working are likely to result in failure or in a significant reduction of functionality, while minor(...)
IEC 61322Applies to installed dose equivalent rate meters, warning assemblies and monitors, and covers equipment intended to measure neutron radiation in dose equivalent quantities of energy between thermal and 15 MeV for the purposes of radiation protection.
IEC 61340-4-4IEC 61340-4-4:2012+A1:2014 specifies requirements for flexible intermediate bulk containers (FIBC) between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres. The explosive atmosphere may be created by the contents in the FIBC or may exist outside the FIBC.
IEC 61343Gives requirements for core cooling monitoring instrumentation to ensure safe operation of BWRs during normal operation and during and after design basis accidents.
IEC 61345Determines the ability of a photovoltaic module to withstand exposure to ultra-violet (UV) radiation from 280 nm to 400 nm.
IEC 61362IEC 61362:2012 includes relevant technical data necessary to describe hydraulic turbine governing systems and to define their performance. It is aimed at unifying and thus facilitating the selection of relevant parameters in bidding specifications and technical bids. It will also serve as a(...)
IEC 61400-1Specifies essential design requirements to ensure the engineering integrity of wind turbines. Provides an appropriate level of protection against damage from all hazards during the planned lifetime.
IEC 61400-2IEC 61400-2:2013 deals with safety philosophy, quality assurance, and engineering integrity and specifies requirements for the safety of small wind turbines (SWTs) including design, installation, maintenance and operation under specified external conditions.
IEC 61400-3IEC 61400-3:2009 specifies additional requirements for assessment of the external conditions at an offshore wind turbine site and specifies essential design requirements to ensure the engineering integrity of offshore wind turbines.
IEC 61400-4IEC 61400-4:2012(E) is applicable to enclosed speed increasing gearboxes for horizontal axis wind turbine drivetrains with a power rating in excess of 500 kW. This standard applies to wind turbines installed onshore or offshore. It provides guidance on the analysis of the wind turbine loads in(...)
IEC 61400-11IEC 61400-11:2012(E) presents measurement procedures that enable noise emissions of a wind turbine to be characterised. This involves using measurement methods appropriate to noise emission assessment at locations close to the machine, in order to avoid errors due to sound propagation, but far(...)
IEC 61400-12-1Specifies a procedure for measuring the power performance characteristics of a single wind turbine and applies to the testing of wind turbines of all types and sizes connected to the electrical power network.
