Resources

Even if you are not involved in the practice of the measurement of antennas but have a passing interest and would like to learn more, this is the standard to read. Doing so will quickly get you up to speed, saving you many hours of unnecessary research and much confusion.

LISN- Line Impedance Stabilization Networks, AN- Artificial Networks, and ISN- Impedance Stabilization Networks all...

Between wars, political conflict, and the economy, you may feel some mornings like just...

This is the second of the three tutorial articles devoted to the frequency-domain analysis of a lossless transmission line. This article shows numerous methods of calculating the voltage, current, and input impedance at various locations on the transmission line, using the Circuit Model.

This article explores the waveform specifications called out in the IEC 61000-4-2 standard.

Although most modern RF amplifiers have a high voltage device rating against impedance mismatch, special care is needed to prevent impedance mismatch. To avoid impedance mismatch of the power amplifier, often an attenuator is also recommended to be connected between the output of the power amplifier and the flying probe.

To provide in-depth coverage of ESD testing methods, in this article, we look at another type of ESD testing based on the “Human Body Model” (HBM) method of ESD testing.

Antennas come in all shapes and sizes and can be used for both radiating and receiving. Selecting a good receiving antenna for emissions testing is not difficult if you take some necessary items into account.

This article discusses common challenges of starting a career in EMC and offers practical advice based on the author's personal experience in the industry.

Traditionally, the start of a new year is a time when we reflect on the progress we’ve made during the year passed and set our goals for the new year. We’ve queried training resources in our industry to provide you with an overview of free or affordable solutions to meet your training goals in 2022.