Resources

This article is devoted to the radiated emissions measurements. These measurements can be performed either at the Open Area Test Site (OATS) or in an Absorber-Lined Shielded Enclosure (ALSE).

The FCC updated its equipment authorization procedures and rules in a number of significant ways.

How is automated handling equipment treated under an S20.20 compliant ESD program?

Snubbers are RC networks that are really useful for protecting components (transistors, diodes, etc.) and reducing EMI, especially in switching applications.

The article discusses the behavior of voltage and current waves on a transmission line with different types of loads and explains how to measure the VSWR of an antenna.

Can the hi-pot test and the insulation resistance test be combined into a single measurement? Let’s discuss each of these parameters as circuit parameters and as safety parameters.

Circuit design reliability verification in Integrated Circuit (IC) design is extremely challenging.

RF signals entering in a system and being rectified can interfere seriously. That has been classically the case of audio noise in speakers because of mobile phones using TDMA technology. The problem is now very common in products with wireless RF funcionality in products with audio areas.

This article is devoted to the current method of the conducted emissions measurements.

For production-line testing, the 25- or 30-amp grounding continuity test is not likely to identify construction anomalies that would not also be identified by a simple low-current test.