Material Matters: Selecting the Right Absorbing Materials for EMC and Compliance Testing

Choose the wrong absorber and even a well-built test setup can produce misleading results. Compare ferrites, polyurethane foam, conductive polymers, and magnetic sheets by frequency range, absorption, and durability to match the right material to your application.

Current Issue

Subscribe | Issue Archive

Discover new products, review technical whitepapers, read the latest compliance news, and check out trending engineering news.

Get our email updates

What's New

Why the Hazards of Lithium-Ion Batteries Require a Different Approach to Safety

As lithium-ion battery energy storage systems scale up, so does the risk when something goes wrong. Drawing on FDNY's frontline experience, this article breaks down thermal runaway, propagation, and the codes, testing, and installation practices that determine whether a battery failure stays contained or turns catastrophic.

The Impact of Power Flow Analysis on an Electrical System

Constant-power loads break the assumptions behind linear circuit analysis, and the fallout shows up as undersized batteries, excess heat, and stressed inverters. New drivetrain testing on a Kia EV-6 reveals why batteries, inverters, and motors need to be modeled together, not separately, to get electrified powertrains right.

2.5D/3D Integration Challenges: Bare Die Testing

As chiplets shrink toward 10 micron pitches, standard CDM testers can no longer verify their ESD withstand voltage before 2.5D/3D assembly. This first installment breaks down why existing test methods fall short and maps out the emerging paths, from contact-based CDM to correct-by-design verification, for closing the gap.

- From Our Sponsors -

Compliance Resources

The Impact of Solar Superstorms on Engineering Infrastructure and Mitigation

This Application Note discusses the threat of solar superstorms and geomagnetic disturbances to modern infrastructure, highlighting historic events like the Carrington Event. It emphasizes the need for robust engineering solutions, national policies, and advanced protection technologies, such as HEMP filters, to safeguard power grids and critical systems from electromagnetic and geomagnetic risks.

More News

FCC, HHS Seek Comment on RF Safety Issues

The FCC and HHS want to know whether today's RF exposure rules are enough, and the FCC is reopening an inquiry it closed in 2019. See what each agency is asking, what evidence they want to see, and how to get your comments on the record.

FDA Publishes Guidance for its Electronic Submission Template for Med Device PMA Applications

New FDA draft guidance aims to make PMA submissions more consistent and reviews smoother. See what the electronic submission template offers device manufacturers, how it supports the review process, and where to send your feedback.

More News

- From Our Sponsors -

Feature Articles

Walking the Line: The Interaction of Flooring and Footwear in Walking Body Voltage Generation

New research reveals that certified ESD footwear and compliant flooring do not guarantee protection on their own. Testing across multiple systems shows some combinations pushed body voltage past 350 volts, well beyond the ANSI/ESD S20.20 limit. See which pairings held up.

Basing CDM ESD Test Goals on Fundamental Limits

Setting CDM test goals has long lacked clear guidance on what counts as adequate performance. New analysis grounded in radial transmission line theory calculates fundamental limits on peak current and slew rate for devices of any size, offering engineers a way to evaluate risk against real use conditions.

Digital Sponsors

Become a Sponsor

Compliance Blog

See All Blogs

Columns

See All Columns

Upcoming Events

04octAll Day09European Microwave Week (EuMW 2026)(All Day)(GMT-04:00) Event Type Conferences & Symposiums

01novAll Day0648th​ ​Annual​ ​Meeting​ ​and​ ​Symposium​ ​of​ ​the Antenna​ ​Measurement​ ​Techniques Association(All Day)(GMT-04:00) Event Type Conferences & Symposiums

See All Events

Industry News

See All Updates