Expert Insights

Many years ago, the author experimented on a metal enclosure of one of his company’s main products. The experiment involved placing an electric field probe inside the empty metal enclosure (no electronics inside) and applying 10 V/m using the IEC 61000-4-3 radiated RF immunity test system.

When it comes to conducting electromagnetic compatibility (EMC) testing, TEM (Transverse ElectroMagnetic) cells and GTEM (GigaHertz Transverse ElectroMagnetic) cells are widely used for their ability to generate controlled and repeatable test environments.

This article presents the derivation of the far-field criterion for two fundamental wire-type antennas: electric (or Hertzian) dipole and magnetic dipole.

During the last four decades, damage to devices from electrical overstress (EOS) has confounded both IC suppliers and customers. The Industry Council on ESD Target Levels investigated numerous EOS root causes and established a white paper on the subject, JEP174 [1].

In our "On Your Mark" columns, we often discuss the importance of American National...

One car manufacturer found that the craze for CB radio caused more than a jamming of the airwaves.

A few basic system components are frequently used to mitigate or suppress electromagnetic interference (EMI) in devices. As engineers and technicians involved in compliance engineering, it is important to know what these components are, what they do, how they’re most effective, and when they’re ineffective.

This article explains how to use a Smith Chart to determine the input impedance to transmission line at a given distance from the source or the load.

In this article we discuss the MOS transistor in the role of ESD protection for high-voltage applications and take a look into a possible future of ESD protection devices for high-performance computing applications.

Spacecraft now and of the future are being controlled by EMC requirements of the past.