Blogs

This month’s article focuses on the value of non-traditional training courses. To be clear, when referring to non-traditional training courses, what is meant is anything that is not considered a traditional program like a two- or four-year degree program, a Master’s, or Ph.D. program, etc.

Antennas come in many different types, and it can sometimes be overwhelming to decide which one fits the need the best. In the case of immunity antennas, the correct selection may be the difference of reaching field and not. The antenna is the most important part of the system. Given that the amplifiers can be the costliest part of the system, one needs to take the time to research and find the correct antenna to make the best use of the available power.

Introduction IEC 61000-4-6 is titled “Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques...

Even if you are not involved in the practice of the measurement of antennas but have a passing interest and would like to learn more, this is the standard to read. Doing so will quickly get you up to speed, saving you many hours of unnecessary research and much confusion.

LISN- Line Impedance Stabilization Networks, AN- Artificial Networks, and ISN- Impedance Stabilization Networks all...

To provide in-depth coverage of ESD testing methods, in this article, we look at another type of ESD testing based on the “Human Body Model” (HBM) method of ESD testing.

Antennas come in all shapes and sizes and can be used for both radiating and receiving. Selecting a good receiving antenna for emissions testing is not difficult if you take some necessary items into account.

This article describes a loss-less impedance matching technique that does not require the use of discrete components but instead uses cables or printed circuit board (PCB) traces, i.e., distributed elements or transmission lines.

Preamplifiers or otherwise called Low-Noise Amplifiers (LNA), are commonly used for Radiated emissions (RE)...

As a compliance engineering professional, you may encounter situations when you must consider how multiple and often conflicting requirements apply to your product and how to deal with them effectively.