Basics

This article is the second in our ongoing series about batteries. This installment provides an overview of lithium-ion batteries – typical properties, principal applications, and trends.

Pressure to get product to market is stressful, as well as full of scenarios that most engineers and designers would like to forget about. Yet in the beehive of activity, the regulations that a product must comply with are critical to those design engineers, as well as other teams. So much, in fact, that a slight misstep early on or during the product life cycle can create devastating circumstances. Driven by market or other business issues some may succumb to the “limp factor” (LF): get it to work and ship at all costs for the first country or countries of use and worry about the others at a later time when the pressure is off. So, how can we prevent the LF from occurring?

In Part 2 of this series we indicated that a key element in a successful static control program was the identification of those items (components, assemblies and finished products) that are sensitive to ESD and the level of their sensitivity. Damage to an ESDS device by the ESD event is determined by the device’s ability to dissipate the energy of the discharge or withstand the current levels involved. This is known as device “ESD sensitivity” or “ESD susceptibility.”

Military EMC design can be particularly vexing. Multiple environments combined with multiple threats lead to multiple requirements. The threat levels, and the resulting requirements, are usually more stringent than found in the commercial world.

Unlike so many technologies in use today, horn antenna history actually started more than a hundred years ago. This short article introduces the reader to the history of horns from the early experiments of radio pioneers to the “horn boom” during the 1940s and 1950s. The article ends with the latest evolution of horn antennas.

Your static control program is up and running. How do you determine whether it is effective? How do you make sure your employees follow it? In Part 3, we suggested that there were at least nine critical elements to successfully developing and implementing an effective ESD control program. In Part 4, we will focus on two more of these elements: training and auditing.

Here are the most likely reasons why, along with the forgotten available 5 GHz band.

Wireless networks offer the convenience of not worrying about being tied to various cables, switches, etc., but they also need to be understood according to their limitations.

Product liability has created problems for manufacturers and product sellers for many decades. These problems have been exacerbated by the expansion of product liability laws throughout the world. In addition, there has been a proliferation of safety regulatory requirements, starting in the United States and then moving to the European Union. In addition, countries such as Japan, China, Australia, Canada, Brazil and South Africa have all recently established or strengthened their product safety regulatory regimes and requirements.