emc

IEC Releases IEC 61000-4-36 Standard

The International Electrotechnical Commission has released the IEC 61000-4-36 standards. IEC 61000-4-36 ed1.0 applies...

LED Lighting Causes Interference

Vehicle mounted LED lighting is causing severe interference to radio communication equipment at a...

Pulse Immunity of Microprocessors/Microcontrollers

Comparatively simple measures can be taken to enhance EMC if a circuit is to...

IEC 61000-6-7 Standard Published

The International Electrotechnical Commission has published the IEC 61000-6-7 standard. IEC 61000-6-7 ed1.0 applies...

ChipScan-ESA 3.0 Software for Measurements with a Spectrum Analyzer

The ChipScan-ESA analysis software from Langer EMV-Technik GmbH has been designed for the clear...

- From Our Sponsors -

EMC Design in the IC Environment with Respect to ESD and Burst

Today's integrated circuits (IC) are very sensitive to disturbances. Fast pulses which were not...

Electromagnetic Simulation Applied to Automotive EMC Testing

The process of designing and testing vehicles for EMC compliance can be long and expensive. Electromagnetic simulation allows potential compliance issues to be identified early in the development process, before the construction of prototypes. However, it is desirable that the simulation is able to model the test setup accurately. In this article we look at the set-up of a virtual EMC test chamber using a commercially available software and compare the simulated results to measurements from a General Motors automotive EMC test.

Australian Competitor & Consumer Commission Investigating USB Phone Chargers

The Australian Competition & Consumer Commission (ACCC) is investigating potentially dangerous USB phone chargers after a women in Sydney died after being electrocuted from a defective USB phone charger.

Extruded Elastomer EMI Gaskets from Leader Tech

One of the most cost-effective ways to provide both EMI shielding and environmental protection...

Using EMC Tools to Help Designs Pass the First Time

1408 F1 cover This is a true story. When I first joined IBM as an EMC engineer, my new manager handed me a document titled ‘EMC Design Process at IBM’ and asked me to comment. I quickly read the short document that basically said that the EMC engineer would provide the design engineers a list of EMC rules, which would be largely ignored.

- From Our Sponsors -

1...181920...29 Page 19 of 29

Digital Sponsors

Become a Sponsor

emc

Digital Sponsors

What's New

FCC to Move Forward on Auto Safety Spectrum Rules

Military and Aerospace EMC: Bandwidths Used in Measurements

FDA Annual Medical Device Regulations Conference Set

Manuel Sierra Castañer Awarded Distinguished AMTA Honor

AMTA Awards Life Membership Award to Peter Collins