Get our free email newsletter

Program for Testing Medical Devices for Susceptibility to RFID Being Launched

On December 6, 2011, MET Labs will launch the Program for Testing Medical Devices for Susceptibility to RFID, to determine potential adverse events of radio frequency identification (RFID) emissions on electronic medical devices.

After months of development with AIM Healthcare Initiative (HCI) and the U.S. Food and Drug Administration (FDA), the Program’s test protocol can now undergo validation using actual medical devices. MET Labs is launching the program with a free informational webinar: http://www.metlabs.com/Industries/RFID/Medical-Device-RFID-Susceptibility-Program.aspx

Medical device manufacturers are invited to participate by submitting representative devices to MET Labs for testing, which will take approximately one day to complete for each submitted device. Eligible medical devices are those covered by the IEC 60601 family of standards.

- Partner Content -

A Dash of Maxwell’s: A Maxwell’s Equations Primer – Part One

Solving Maxwell’s Equations for real-life situations, like predicting the RF emissions from a cell tower, requires more mathematical horsepower than any individual mind can muster. These equations don’t give the scientist or engineer just insight, they are literally the answer to everything RF.

There are several benefits to participation. Submitted equipment will be tested in several different RFID frequency bands and participants will receive a confidential test report. If equipment is found to be susceptible to RF interference, MET Labs will assist manufacturers with strategies for minimizing or eliminating interference effects.

The confidentiality of manufacturer participation and individual test results will be strictly maintained. MET Labs will only share or publish aggregate, unattributed data that relates to the validation and/or further development of a final test protocol with the AIM RFID Experts Group. MET Labs will not share or publish any results without the explicit, written consent of the medical device manufacturer.

The increasing use of wireless monitoring devices in RF-rich environments (from RFID, wireless LANs and other devices) makes this research critical in the prevention of potential adverse effects from RFID emissions on patient safety.

Upon completion and acceptance by AIM, Inc., the final test protocol will be submitted to recognized national and international standards organizations so that it may be publically available.

Interested medical device manufacturers are asked to participate in a free informational webinar on December 6, 2011 that will provide more details about the program. Those interested but unable to attend should complete an online interested party form: http://www.metlabs.com/Industries/RFID/Medical-Device-RFID-Susceptibility-Program.aspx Eligible form completers will receive a Program Information Packet that includes a sample test report.

- From Our Sponsors -

For more information about MET Laboratories, please visit www.METLabs.com.

 


Related Articles

Digital Sponsors

Become a Sponsor

Discover new products, review technical whitepapers, read the latest compliance news, and check out trending engineering news.

Get our email updates

What's New

- From Our Sponsors -

Sign up for the In Compliance Email Newsletter

Discover new products, review technical whitepapers, read the latest compliance news, and trending engineering news.