Products & Services News

Rohde & Schwarz has introduced two probes that tap into new field of applications. Model RT-ZS60 is the first compact, ground-referenced 6 GHz probe on the market and is suitable for test applications required ground-referenced measurements of signal integrity. The probe scores top marks with its extremely low loading of the test point (1 M Ohm, 0.3 pF) for both DC as well as high frequencies in addition to its minimal noise (2 mV RMS) and high linearity (70 dB THD).

When the makers of a power system for the marine industry wanted to include a 50 amp version of their popular 30 am SmartPlug system, they needed to find a new thermoplastic material solution that would provide the necessary flame retardancy and impact resistance required for this new design.

Interpower has introduced a new low-cost convenient source of AC power that offers customers the opportunity to test products before exporting them globally. The Interpower International Power Source (model 85521711), offers 7 of the most common country specific AC receptacles ensuring that equipment under test utilizes the proper AC plug.

LCR Electronics, Inc. has announced the opening of a new System Integration Design, Development and Test Facility in Ridgeland, MS. The facility was acquired by LCR as was previously the Diversified Technology, Inc. (DTI) Systems Engineering Group.

TDK Corporation has announced the extended the range of EPCOS aluminum electrolytic capacitors by adding types with higher rated voltages.

W. L. Gore & Associates has announced an expanded line of adhesive vents with a new product specifically engineered for small enclosures, such as displays for electric bikes, mobility aids, and heavy duty equipment.

Global Test Solutions announced the launch of the DL Series electronic direct current (DC) loads from NF Corporation with high speed feedback control. Four models are available, each with six modes combining constant voltage, current and resistance from 300 to 1000 watts.

The Washington Laboratories Academy and the Center for Advanced Engineering and Research (CAER) have reached a collaborative agreement to provide technology training in Southeastern region of Virginia. Training will focus on practical design and development of electronics, nuclear and wireless technologies. Initial topics will include electromagnetic compatibility design, wireless regulations for global markets and electrical safety design.

Leader Tech announced their CFS conductive form shielding material that consists of resilient Nickel-Copper polyurethane foam which is layered between two pieces of conductive fabric. The operating temperature ranges from -40°F to +156°F (-40°C to +70°C) and the shielding effectiveness is 60dB typical (10 MHz to 3 GHz). Sheets are available up to 1.0m x 1.0m and in thickness of 1.5mm, 2.5mm and 3.5mm.

Fair-Rite Products Corp. has announced the expansion of its line of power inductive materials to include a full offering of standard components as well as custom shapes and sizes. These materials are highlighted in a new catalog and are designed to optimize performance across operating frequency and temperature to produce efficient energy conversation products.