IEC 61578Defines type test methods permitting calibration and measurement of the effectiveness of radon daughters' compensation of radioactive aerosol monitors.
IEC 61582Specifies the classification, general design requirements, performance characteristics and test procedures for in vivo counting systems for detecting trace amounts of radionuclides in the bodies of persons working in nuclear power plants, laboratories and facilities handling radionuclides, and(...)
IEC 61584Specifies general characteristics, general test procedures, electrical, safety and environmental characteristics and the identification certificate for installed, portable or transportable assemblies intended to measure a) the direction of an X or gamma radiation source in terms of azimuth and(...)
IEC 61619Specifies a method for the determination of polychlorinated biphenyl (PCB) concentration in non-halogenated insulating liquids by high-resolution capillary column gas chromatography using an electron capture detector (ECD).
IEC 61646IEC 61646:2008 lays down requirements for the design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1.
IEC 61683Describes guidelines for measuring the efficiency of power conditioners used in stand-alone and utility-interactive photovoltaic systems, where the output of the power conditioner is a stable a.c. voltage of constant frequency or a stable d.c. voltage.
IEC 61701IEC 61701:2011 describes test sequences useful to determine the resistance of different PV modules to corrosion from salt mist containing Cl- (NaCl, MgCl2, etc.). All tests included in the sequences, except the bypass diode functionality test, are fully described in IEC 61215, IEC 61646, IEC(...)
IEC 61724Recommends procedures for the monitoring of energy-related photovoltaic (PV) system characteristics, and for the exchange and analysis of monitored data. The purpose is the assessment of the overall performance of PV systems.
IEC 61725Provides a normative equation for analytically deriving a set of data points or a curve of irradiance versus time of day for a synthetic solar day.
IEC 61727Applies to utility-interconnected photovoltaic (PV) power systems operating in parallel with the utility and utilizing static (solid-state) non-islanding inverters for the conversion of DC to AC. Lays down requirements for interconnection of PV systems to the utility distribution system.
IEC 61730-1Describes the fundamental construction requirements for photovoltaic modules in order to provide safe electrical and mechanical operation during their expected lifetime. Addresses the prevention of electrical shock, fire hazards, and personal injury due to mechanical and environmental stresses.
IEC 61730-2Describes the testing requirements for photovoltaic modules in order to provide safe electrical and mechanical operation during their expected lifetime. Addresses the prevention of electrical shock, fire hazards, and personal injury due to mechanical and environmental stresses.
IEC 61771Specifies verification and validation procedures for the design of the control-room system of nuclear power plants and gives verification and validation criteria for the assignment of functions and for the integrated control-room system.
IEC 61772IEC 61772:2009 supplements IEC 60964 and presents design requirements for the application of VDUs in main control rooms of nuclear power plants. Assists the designer in specifying VDU applications including displays on individual workstations and larger displays for group-working or distant viewing.
IEC 61784-3-18Specifies a safety communication layer (services and protocol) based on CPF 18 of IEC 61784-2 and IEC 61158 Type 22. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer.
IEC 61800-5-2Specifies requirements and makes recommendations for the design and development, integration and validation of PDS(SR)s in terms of their functional safety considerations.
IEC 61829Describes procedures for on-site measurement of crystalline silicon photovoltaic (PV) array characteristics and for extrapolating these data to Standard Test Conditions (STC) or other selected temperatures and irradiance values.
IEC 61839Specifies functional analysis and assignment procedures for the design of the control-room system for nuclear power plants and gives rules for developing criteria for the assignment of functions. Supplements IEC 60964. Is applicable to the design of new control-rooms or to backfits to existing(...)
IEC 61850-3Applies to substation automation systems and more specifically defines the communication between intelligent electronic devices in the substation and the related system requirements.
IEC 61850-6EC 61850-6:2009(E) specifies a file format for describing communication-related IED (Intelligent Electronic Device) configurations and IED parameters, communication system configurations, switch yard (function) structures, and the relations between them. The main purpose of this format is to(...)
