Get our free email newsletter

The EU Conflict Minerals Regulation

Over the last 10-15 years, supply chain management has increasingly entailed addressing environmental, social, and governance (ESG) issues alongside the likes of quality, cost, service, and delivery. This has been experienced in the electronics industry, but equally the likes of the textiles and apparel, jewelry, automotive, and aerospace and defense sectors. Corporate practices have changed in light of campaigning by political activists and non-governmental organizations, as has legislation and/or government-backed voluntary initiatives.

For those involved in the manufacture, distribution, and sale of electrical and electronic equipment, understanding conflict minerals – metals and minerals derived under duress and traded to keep armed groups funded – is likely best cast in terms of the wider identification, assessment, and management of ESG risks in supply chains (other risks might include, for example, child and forced labor, corruption and bribery, environmental pollution, etc.). While existing legislation may not apply to your business today, it might tomorrow.

Moreover, customers may have their own expectations and pressures can come from other actors like campaign groups and investors. This is emphasized early on in this article, especially as the EU Conflict Minerals Regulation does not presently apply to electrical equipment manufacturers unless they also happen to import conflict minerals into the EU – and in quantities that exceed specified threshold values. Even so, such manufacturers are a target of an EU effort to encourage voluntary disclosure on conflict mineral uses (on which, more below).

- Partner Content -

EMC & eMobility

For a company embarking on EMC testing for either component or vehicle-level testing of their EV products, it is necessary first to have a good understanding of the EMC regulatory situation.


Human history is littered with conflicts arising from natural resource access, so in one sense the concept of a conflict resource or conflict mineral is nothing new. However, at any given time, some natural resources will likely prove more valuable than others. Over the last 30 years or so, demand for tin, tantalum, tungsten, and gold (the so-called 3TG and what are presently considered conflict minerals) has made controlling their extraction and processing lucrative. Table 1 lists 3TG uses in a variety of products, electrical and electronic equipment included.

  • Used in alloys, tin plating, and solders for electronic circuits.
  • Used in car parts ranging from engine components through to gears, pumps, joints, and windshields.
  • Used as solder in buttons, zippers, and other fasteners as well as in jewelry. Composite material in rivets and eyes.
  • Used mainly to produce tantalum capacitors, particularly for applications requiring high performance, small format and high reliability, such as hearing aids, pacemakers, global positioning systems (GPS), laptops, mobile phones, and games consoles.
  • Used in metal wires, electrodes, contacts in lighting, and electronic, electrical and heating applications. Tools may incorporate tungsten, often when alloyed with steel.
  • Present in some chemical compounds used in semiconductor and manufacturing processes.
  • Used as plating to produce the shine on zippers, fasteners, and other metal components.
  • Composite metal in or on jewelry and watches.

Table 1: 3TG uses

In turn, control of these resources and trade in them can become a political flashpoint, and something fought over in civil wars. This was the case in the Democratic Republic of the Congo (D.R.C.) in the late 1990s and early 2000s, when the First and Second Congo Wars entailed both the Congolese national army and rebel groups seeking control over 3TG mining, which encompasses many artisanal and small-scale mines.

Conditions in such mines are tough. Miners are known to work up to 48 hours at a time and risk life and limb in an environment of mudslides and tunnel collapses. As well as the human cost associated with this type of mining, the wars in the D.R.C. region have caused the deaths of more than five million people, many due to disease and starvation. Although progress has been made towards a lasting peace since the wars ended, armed groups retain control over some mines, and the trade in conflict minerals persists.

U.S. and EU Regulatory Responses

The last decade has been marked by governments, specifically in the developed world, increasingly recognizing and highlighting concerns to industry over the use of conflict minerals in the manufacture of products. This has led to legislation, with the earliest adopter being the U.S. with the Dodd-Frank Act of 2010. Section 1502 of this particular law sets requirements for companies whose products incorporate 3TGs derived from the D.R.C. and neighboring countries.

Provisions of the Dodd-Frank Act were implemented through inclusion within the general rules and regulations of the Securities Exchange Act of 1934, specifically Section 240.13p-1. This requires issuers – major stock market-listed companies required to make regular Securities and Exchange Commission (SEC) filings – to report on efforts to eliminate conflict-implicated 3TGs from supply chains if they are used in their products. Companies covered by Section 240.13p-1 must take the following steps:

- From Our Sponsors -
  • Determine applicability;
  • Conduct country of origin inquiry;
  • Establish a due diligence process;
  • Determine status; and
  • File a report.

The Dodd-Frank Act does not prescribe a due diligence process, but the Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas,1 published by the Organization for Economic Co-Operation and Development (OECD), is cited as a suitable reference. At the core of the OECD’s Due Diligence Guidance is a five-step framework, as summarized in Table 2.

Step Practice
1 Establish strong management systems
  • Adopt and commit to a supply chain policy for conflict minerals.
  • Establish a system that allows the identification of the smelters in the company’s mineral supply chain.
  • Maintain records (preferably electronic) for at least five years.
  • Incorporate policies and traceability into supplier agreements and contracts.
  • Establish mechanisms for grievances and whistle-blowers.
2 Identify and assess risks
  • Identify smelters/refiners in supply chain.
  • Assess due diligence practice of smelters.
3 Respond to risks
  • Report findings to senior management.
  • Exercise leverage over suppliers that can work most effectively to mitigate risks further back in the chain.
  • Monitor, track, adapt, and adjust risk mitigation efforts.
4 Audit Carry out an independent third-party audit of smelter’s/refiner’s due diligence program.
5 Publicly report
  • Report – preferably in annual sustainability or corporate social responsibility reports – on the due diligence program, such as: the company policy, responsible management, steps taken to identify and assess smelters/refiners.

Table 2: The five-step framework of the OECD Due Diligence Guidance

In 2017, the EU adopted its own law concerning conflict minerals, Regulation (EU) 2017/821.

Regulation (EU) 2017/821 applies to EU-based importers of 3T ores and concentrates as well as gold above certain defined thresholds, as are detailed in the Regulation’s Annex I. For in-scope importers, obligations span establishing suitable management systems, assessing and managing relevant supply chain risks, conducting third party audits, and information disclosure.

It is worth highlighting that the EU law is quite different from the Dodd-Frank Act, with the following summarizing specific points of difference:

  • The EU Regulation does not impose any obligations upon downstream users of 3TGs, i.e., manufacturers of components or finished products, unless they also happen to be importing 3TGs into the EU. By comparison, U.S. legislation does apply in the downstream, with publicly listed companies that manufacture or contract to manufacture products that contain 3TG falling within the scope of the legislation.
  • Unlike Dodd-Frank, the EU Regulation exempts small volume importers of 3TG by stipulating that the law “shall not apply to Union importers of minerals or metals where their annual import volume of each of the minerals or metals concerned is below the volume thresholds set out in Annex I.” 2 No such exemption exists under the U.S. legislation.
  • The EU Regulation is more specific in defining what 3TG ores, concentrates and metals come within its scope. The Regulation’s Annex I gives a lot of detail, including combined nomenclature codes.
  • Geographically, the EU Regulation is non-specific. Rather, the law concerns itself with 3TG sourced from conflict-affected and high-risk areas (CAHRAs) that might exist in the world. The U.S. legislation is specific though, applying only to conflict minerals sourced from the D.R.C. and its nine neighboring states.

As such, electrical equipment manufacturers are not directly affected by the EU Regulation in the way that they otherwise might fall within the scope of the Dodd-Frank Act if publicly listed in the U.S. (e.g., as the likes of many of the largest consumer electronics companies are). However, this is not to say that EU policy-makers had not given thought to the EU Regulation applying to downstream users of 3TGs, including businesses in the electronics sector. They had, and for those interested in the discussions that took place and what compromise was reached before the Regulation was adopted, a partial record exists within minutes of the European Commission’s “Member State Expert Group on responsible sourcing of tin, tantalum, tungsten, and gold” that are available online.3

Minutes from the 9 March 2018 meeting of this Group reveals that the compromise which saw Regulation (EU) 2017/821 “based on only importers of metals and minerals being covered by the legal requirements of the Regulation” entailed an expectation that “a series of measures also should be taken to retain the focus on and validity of efforts taken by downstream companies.” What, then, of these measures?

The EU’s “Transparency Platform for Downstream Companies”

At the time of writing, the measure of most prominence and greatest significance for manufacturers, importers and distributors of components and finished products (including but not limited to items of electrical and electronic equipment) is the proposed transparency platform. Detail related to this can be found within minutes of the above-mentioned Member State Expert Group, but the author was fortunate enough to get an insight from a European Commission policy officer first-hand when she presented on conflict minerals at the RINA Electrical and Electronic Equipment and the Environment Conference in November 2019. This presentation revealed that the platform is to take the name of ReMIS, the Responsible Minerals Information System.

ReMIS: What We Know So Far

The European Commission describes4 it as an “information system that aims to support downstream companies, in particular, to share and publish – on a voluntary basis – information regarding their due diligence practices and exchange best practices in this regard.” The European Commission has also outlined how the system will likely work, with company-submitted registration information initially being reviewed and validated by the Competent Authority appointed under Regulation (EU) 2017/821 of the EU Member State in which the company is legally based.

To register, business information including name and address, supply chain position (upstream/downstream), industry sector(s) in which the business is active, metals and minerals handled, and a summary account of due diligence practice appears to be anticipated. It would then seem that any more detailed information a company wished to share for online publication on ReMIS would be reviewed by a designated European Commission service desk. What this review would entail is, however, currently unclear.

A prototype version of ReMIS has been tested, with at least some industry stakeholders involved in this testing. This is reported upon in the 5 June 2019 minutes of the responsible sourcing Member State Expert Group, which notes that “the Commission received positive feedback on the usability and functionalities of the system.” However, it seems that safeguarding personal data is a concern, as is managing both European Commission and Member State Competent Authority compliance with requirements under the EU General Data Protection Regulation (GDPR). Concerning this, the Commission has prepared an initial draft of a GDPR-required “joint controllership agreement,” but it is not known whether this has been accepted at the time of writing.

Implications for Electrical Equipment Manufacturers

It is likely that, in the years ahead, the European Commission’s ReMIS platform will result in various businesses that use 3TGs in their components and products publicly reporting upon this as well as the efforts they are taking to assure themselves that 3TGs are responsibly sourced. Demand for information may come from the investment community, particularly to help the community become better informed – and so able to assess – ESG risks within business supply chains.

How, then, to prepare for this?

Many large, consumer-facing electronics companies whose products incorporate 3TGs have already taken significant strides in their management practices. Among them are Apple, Dell, HP Inc., and Intel. The way these companies have responded provides insight into how to manage and report upon conflict mineral uses in electronics supply chains.

There is overlap in practice, which includes policy- and goal-setting, surveying suppliers, determining smelters in use, comparing smelters with those on approved lists (e.g., as published by the U.S.-based Responsible Minerals Initiative, RMI5), arranging smelter audits, and running awareness-raising training events. It is worth explaining the emphasis placed upon smelters here, this is simply because they are perceived to constitute the pinch point in minerals supply chains (see Figure 16).

Figure 1: Actors in a minerals supply chain

For practitioners, the following steps are advisable:

  • Understand and scale the challenge facing your company. This is likely to include determining possible 3TG uses in products, then determining which suppliers you are going to engage with and how you are going to do this (e.g., by working up your own survey or making use of, say, the RMI Conflict Minerals Reporting Template7).
  • Frame the company response, either with a new program of work or by expanding existing ones (e.g., programs for managing substance restrictions found in, for example, the EU RoHS Directive and/or EU REACH Regulation). Initially, this will be a top-level exercise anticipated to entail achieving senior management buy-in, securing a budget, documenting key policies and procedures, and determining roles and responsibilities for the likes of contacting suppliers and the collection, collation, and analysis of data. Cross-functional work is expected, so even if the program is owned and led by an Environmental or Corporate Responsibility Manager, the support of personnel from, for example, Procurement, Finance, and IT, should be considered, approved, and documented early on.
  • Consider the optimal IT solution. This will depend on how many products and suppliers you are dealing with. If a large number, this will result in a lot of data, making a more automated (and sophisticated) solution desirable.
  • Document as you go, including scoping decisions and other such judgements. This is good practice with regards due diligence, constituting a record of key decision-making and reasoning deployed.
  • Phase the program in, monitoring as you proceed. This provides scope for identifying problems and making corrections for better implementation overall.

Fostering a perspective that goes beyond compliance will be beneficial. To see conflict minerals as something to be complied with is to miss potential opportunities like reducing supply-side ESG risk and enhancing relationships with preferred suppliers and customers. It is something the investment world is also likely to use to assess company performance in the future, so getting ahead with respect to practice and disclosure may offer a competitive advantage.


  2. Accessible through the “Meetings” tab on the webpage of
  3. Accessible through the “Meetings” tab on the webpage of
  4. Information comes from the presentation “The EU Regulation on responsible sourcing of minerals (“Conflict Minerals”): progress on implementation” given by Zora Mincheva, DG TRADE Policy Officer, to the RINA EEE & the Environment Conference on 14 November 2019.
  6. Adapted from ChainLink Research, “Turning conflict minerals law compliance into a competitive advantage,” September 2013.

Related Articles

Digital Sponsors

Become a Sponsor

Discover new products, review technical whitepapers, read the latest compliance news, trending engineering news, and weekly recall alerts.

Get our email updates

What's New

- From Our Sponsors -

Sign up for the In Compliance Email Newsletter

Discover new products, review technical whitepapers, read the latest compliance news, trending engineering news, and weekly recall alerts.