Line Impedance Stabilization Network - In Compliance Magazine

« Back to Glossary Index

A low-pass filter typically placed between ac or dc power source and EUT (Equipment Under Test) to create a known impedance and to provide an RF noise measurement port. It also isolates the unwanted RF signals from the power source.

The Implementation of SEMI E176
This article provides practical guidance on the implementation of the SEMI E176 standard for managing EMI in a semiconductor manufacturing environment and device handling such as printed circuit board assembly.
Bulk Current Injection (BCI) – Substitution Method and Closed-Loop Method with Power Limitation
This column explores the conducted immunity test known as a Bulk Current Injection (BCI) test, according to ISO 11452-4 specification.
S-Parameters Tutorial – Part II: EMC Measurements and Testing
This part II of the s-parameter tutorial presents several examples of the s-parameter use in EMC measurements and testing.
What Every Electronics Engineer Needs to Know About: Measuring Receivers
Dealing with EMI in Semiconductor Manufacturing: Part II
Enter SEMI E176-1017. It places the focus not on limited types of emission from any particular equipment, but on EMI in the overall manufacturing environment and in key locations where it specifically matters.

« Back to Term Index

Line Impedance Stabilization Network [LISN]