EN 61547:2009Electromagnetic immunity requirements applies to lighting equipment which is within the scope of IEC Technical Committee 34, such as lamps, auxiliaries and luminaires, intended either for connecting to a low voltage electricity supply or for battery operation.
EN 62020:1999Applies to residual current monitors having rated voltages not exceeding 440 V a.c. and rated currents not exceeding 125 A for household and similar purposes.
EN 62423:2012This standard specifies requirements and tests for type B RCDs. Requirements and tests given in this standard are in addition to the requirements of type A residual current devices. Type B RCCBs and Type B RCBOs are able to provide protection in case of alternating residual sinusoidal currents(...)
EN ISO 14982:2009Specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of tractors and all kinds of mobile (including hand-held) agricultural machinery, forestry machinery, landscaping and gardening machinery.
Energy HarvestingThe process in which energy is captured from a system's environment and converted into usable electric power.
Equalizationthe process of adjusting the balance between frequency components within an electronic signal
Equipment Under TestAny electronic assembly under test. Also known as Device Under Test (DUT).
EUTAny electronic assembly under test. Also known as Device Under Test (DUT).
Error Vector MagnitudeA measure used to quantify the performance of a digital radio transmitter or receiver. The error vector magnitude is equal to the ratio of the power of the error vector to the root mean square (RMS) power of the reference.
EVMA measure used to quantify the performance of a digital radio transmitter or receiver. The error vector magnitude is equal to the ratio of the power of the error vector to the root mean square (RMS) power of the reference.
ESD ADV11.2-1995Provides guidance in understanding the triboelectric phenomenon and relates current information and experience regarding tribocharge testing as used in static control for electronics.
ESD ADV53.1-1995This Advisory document defines the minimum requirements for a basic ESD protective workstation used in ESD sensitive areas. It provides a test method for evaluating and monitoring workstations. It defines workstations as having the following components: support structure, static dissipative(...)
EthernetA family of computer networking technologies for local area networks (LANs).
Extremely Low FrequencyExtremely Low Frequency usually refers to magnetic fields at 0.5 to 100 Hertz.
ELFExtremely Low Frequency usually refers to magnetic fields at 0.5 to 100 Hertz.
