ISO 7637-2:2011Specifies test methods and procedures to ensure the compatibility to conducted electrical transients of equipment installed on passenger cars and commercial vehicles fitted with 12 V or 24 V electrical systems. It describes bench tests for both the injection and measurement of transients. It(...)
ISO 7637-3:2007Establishes a bench top test for the evaluation of the immunity of devices under test (DUTs) to transient transmission by coupling via lines other than supply lines. The test transient pulses simulate both fast and slow transient disturbances, such as those caused by the switching of inductive(...)
ISO 11451-1:2005Specifies general conditions, defines terms, gives practical guidelines and establishes the basic principles of the vehicle tests used in the other parts of ISO 11451 for determining the immunity of passenger cars and commercial vehicles to electrical disturbances from narrowband radiated(...)
ISO 11451-2:2005Specifies a vehicle test method for determining the immunity of passenger cars and commercial vehicles to electrical disturbances from off-vehicle radiation sources, regardless of the vehicle propulsion system (e.g. spark ignition engine, diesel engine, electric motor). It can also be readily(...)
ISO 11451-3:2007Specifies methods for testing the immunity of passenger cars and commercial vehicles to electromagnetic disturbances from on-board transmitters connected to an external antenna and portable transmitters with integral antennas, regardless of the vehicle propulsion system (e.g. spark ignition(...)
ISO 11451-4:2013Specifies bulk current injection (BCI) test methods for testing the electromagnetic immunity of electronic components for passenger cars and commercial vehicles regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor). The electromagnetic disturbance(...)
ISO 11452-1:2005Specifies general conditions, defines terms, gives practical guidelines and establishes the basic principles of the component tests used in the other parts of ISO 11452 for determining the immunity of electronic components of passenger cars and commercial vehicles to electrical disturbances(...)
ISO 11452-2:2004Specifies an absorber-lined shielded enclosure method for testing the immunity (off-vehicle radiation source) of electronic components for passenger cars and commercial vehicles regardless of the propulsion system (e.g spark-ignition engine, diesel engine, electric motor). The device under(...)
ISO 11452-5:2002Specifies stripline tests for determining the immunity of electronic components for passenger cars and commercial vehicles to electrical distrubances from narrowband electromagnetic energy, regardless of the vehicle propulsion system (e.g. spark-ignition engine, diesel engine, electric motor).(...)
ISO 11452-7:2003Specifies a direct RF power injection test for determining the immunity of electronic components of passenger cars and commercial vehicles to electrical disturbances from narrowband electromagnetic energy, regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric(...)
ISO 11452-8:2007Specifies tests for the electromagnetic immunity of electronic components for passenger cars and commercial vehicles, regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor), to magnetic fields generated by power transmission lines and generating(...)
ISO 11452-9:2012Specifies test methods and procedures for testing electromagnetic immunity to portable transmitters of electronic components for passenger cars and commercial vehicles, regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor). The device under test (DUT),(...)
ISO 11452-10:2009Specifies a conducted voltage test method and procedure for determining the immunity of electronic components of passenger cars and commercial vehicles, regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor). The method is applied to each individual(...)
ISO 11452-11:2010Specifies a reverberation chamber method for testing the immunity (off-vehicle radiation source) of electronic components for passenger cars and commercial vehicles, regardless of the propulsion system (i.e. spark-ignition engine, diesel engine, electric motor). The device under test (DUT),(...)
ISO 11553-1Describes hazards generated by laser processing machines, and specifies the safety requirements relating to radiation hazards and hazards generated by materials and substances. It also specifies the information to be supplied by the manufacturers of such equipment.
ISO 12405-3ISO 12405-3:2014 specifies test procedures and provides acceptable safety requirements for voltage class B lithium-ion battery packs and systems, to be used as traction batteries in electrically propelled road vehicles.
ISO 13850Specifies functional requirements and design principles for the emergency stop function on machinery, independent of the type of energy used to control the function.
ISO 13943Defines terminology relating to fire safety as used in International Standards and other documents of the International Standardization Organization and the International Electrotechnical Commission.
ISO 15118-2ISO 15118-2:2014 specifies the communication between battery electric vehicles (BEV) or plug-in hybrid electric vehicles (PHEV) and the Electric Vehicle Supply Equipment.
ISO 10605:2008Specifies the electrostatic discharge (ESD) test methods necessary to evaluate electronic modules intended for vehicle use. It applies to discharges in the following cases: ESD in assembly, ESD caused by service staff, ESD caused by occupants. ISO 10605:2008 describes test procedures for(...)
