IEEE 1597.1-2008A method to validate computational electromagnetics computer modeling and simulation techniques, codes, and models is defined in this standard. It is applicable to a wide variety of electromagnetic applications including, but not limited to, the fields of electromagnetic compatibility, radar(...)
IEEE 1597.2-2010This recommended practice is a companion document for IEEE Std 1597.1-2008. Examples and problem sets to be used in the validation of computational electromagnetics (CEM) computer modeling and simulation techniques, codes, and models are provided. It is applicable to a wide variety of(...)
IEEE 1775-2010Electromagnetic compatibility (EMC) criteria and consensus test and measurements procedures for broadband over power line (BPL) communication equipment and installations are presented. Existing national and international standards for BPL equipment and installations are referenced. This(...)
IEEE 1782-2014This guide discusses the collection, categorization, and use of information related to electric power distribution interruption events and will be used in the development of industry guidelines. This guide presents a minimal set of data and a consistent categorization structure that, when used(...)
IEEE 1900.1-2008This standard provides definitions and explanations of key concepts in the fields of spectrum management, cognitive radio, policy-defined radio, adaptive radio, software-defined radio, and related technologies. The document goes beyond simple, short definitions by providing amplifying text(...)
IEEE 1900.2-2008Technical guidelines are provided in this recommended practice for analyzing the coexistence or, alternatively, the interference between radio systems, operating in the same spectrum assignment or between different spectrum assignments.
IEEE 1900.4-2009The building blocks comprising (i) network resource managers, (ii) device resource managers, and (iii) the information to be exchanged between the building blocks, for enabling coordinated network-device distributed decision making that will aid in the optimization of radio resource usage,(...)
IEEE 2700EEE 2700 provides a common framework for sensor performance specification terminology, units, conditions and limits is provided. Specifically, the accelerometer, magnetometer, gyrometer/gyroscope, barometer/pressure sensors, hygrometer/humidity sensors, temperature sensors, ambient light(...)
IEEE C37.90.2-2004Design tests for relays and relay systems that relate to the immunity of this equipment to Radiated Electromagnetic Interference from Transceivers are specified. Field strength, test frequencies, modulation, sweep rates, equipment setup and connection, test procedures, criteria for acceptance,(...)
IEEE C63.2-1996Electromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, RMS, and average values for electrical and electronic equipment for various applications are provided.
IEEE C63.2-2009Electromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided in this standard.
IEEE C63.4-1991This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment (ITE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and(...)
IEEE C63.4-1992Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included.(...)
IEEE C63.4-2000U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission(...)
IEEE C63.4-2003U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission(...)
IEEE C63.4-2009This Standard covers U. S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. It does not include generic nor product-specific(...)
IEEE C63.5-1998Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40 GHz are provided. Antennas included are linearly polarized antennas such as loops, rods (monopoles), tuned dipoles, biconical dipoles, log-periodic(...)
IEEE C63.5-2004Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40 GHz are provided. Antennas included are linearly polarized antennas such as loops, rods (monopoles), tuned dipoles, biconical dipoles, log-periodic(...)
IEEE C63.5-2006Methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40 GHz are provided. Antennas included are linearly polarized antennas such as loops, rods (monopoles), tuned dipoles, biconical dipoles, log-periodic(...)
IEEE C63.6-1988Shows the basis for the acceptability criterion of +or-14 dB for the site attenuation measurements required in ANSI C63.4-1988. This covers measurement methods for emissions from low voltage electrical and electronics equipment in the range of 10 kHz to 1 GHz.
