IEC 62282-3-100IEC 62282-3-100:2012(E) is applicable to stationary fuel cell power systems intended for indoor and outdoor commercial, industrial and residential use in non-hazardous (unclassified) areas. It contemplates all significant hazards, hazardous situations and events, with the exception of those(...)
IEC 62282-3-200IEC 62282-3-200:2011 describes how to measure the performance of stationary fuel cell power systems for residential, commercial, agricultural and industrial applications.
IEC 62282-3-201IEC 62282-3-201:2013 provides test methods for the electric/thermal and environmental performance of small stationary fuel cell power systems that meet the following criteria: output: nominal electric power output of less than 10 kW; output mode: grid-connected/independent operation or(...)
IEC 62282-3-300IEC 62282-3-300:2012 provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems in compliance with IEC 62282-3-100 and applies to the installation of the following systems: intended for electrical connection to mains directly or with a(...)
IEC 62282-4-101IEC 62282-4-101:2014 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks. This standard is limited to electrically powered industrial trucks and is applicable to material-handling equipment, e.g. forklifts. It applies to gaseous(...)
IEC 62282-5-1IEC 62282-5-1:2012(E) covers construction, marking and test requirements for portable fuel cell power systems intended to produce electrical power. Applies to a.c. and d.c. type portable fuel cell power systems, with a rated output voltage not exceeding 600 V a.c., or 850 V d.c. for indoor and(...)
IEC 62282-6-100IEC 62282-6-100:2010(E) covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Establishes requirements for all micro(...)
IEC 62282-6-200IEC 62282-6-200:2012 provides test methods which are required for the performance evaluation of micro fuel cell power systems for laptop computers, mobile phones, personal digital assistants, cordless home appliances, TV broadcast cameras, autonomous robots, etc.
IEC 62282-6-300IEC 62282-6-300:2012 covers interchangeability of micro fuel cell (MFC) fuel cartridges to provide the cartridge compatibility for a variety of MFC power units while maintaining the safety and performance of MFC power systems.
IEC 62302Is applicable to equipment used for sampling and continuous measurement of radioactive noble gases in the workplace, in gaseous effluents discharged into the environment as well as in the environment itself.
IEC 62303Applicable to equipment used for sampling and continuous measurement of tritium in the workplace, in gaseous effluents discharged into the environment as well as in the environment itself and it is applicable to installed, portable and transportable equipment.
IEC 62321Specifies the determination of the levels of lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr(VI)) contained in inorganic and organic compounds, and two types of brominated flame retardants, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) contained in(...)
IEC 62340Gives requirements related to the avoidance of CCF of I&C systems that perform category A functions; additionally requires the implementation of independent I&C systems to overcome CCF, while the likelihood of CCF is reduced by strictly applying the overall safety principles of IEC SC 45A(...)
IEC 62342Provides strategies, technical requirements, and recommendations for the management of ageing of nuclear power plant instrumentation and control systems and associated equipment.
IEC 62353IEC 62353:2014 applies to testing of medical electrical equipment and medical electrical systems, hereafter referred to as ME equipment and ME systems, or parts of such equipment or systems, which comply with IEC 60601-1:1988 (second edition) and its amendments and IEC 60601-1:2005 (third(...)
IEC 62364IEC 62364:2013 serves to present data on particle abrasion rates on several combinations of water quality, operating conditions, component materials, and component properties collected from a variety of hydro sites; develop guidelines for the methods of minimizing particle abrasion by(...)
IEC 62368-1IEC 62368-1:2014 deals with the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V.
IEC 62372Is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. Establishes basic parameters such as a light output and intrinsic resolution and specifies the requirements for the equipment and the methods of defining the basic(...)
IEC 62385Defines the requirements for demonstrating acceptable performance of safety system instrument channels through response time testing, calibration verification, and other means. The same requirements may be adopted for demonstrating the acceptable performance of non-safety systems and other(...)
IEC 62387Applies to all kinds of passive dosimetry systems that are used for measuring the personal dose equivalent (for whole body dosimetry), the personal dose equivalent (for eye lens dosimetry), the personal dose equivalent (for both whole body and extremity dosimetry), the ambient dose equivalent(...)