IEC 60695-2-13Specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT).
IEC 60695-4The terms and definitions in this standard are applicable to fire tests for electrotechnical products. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
IEC 60695-6-1Gives guidance on: a) optical measurement of smoke obscuration; b) general aspects of optical smoke test methods; c) consideration of test methods; d) expression of smoke test data; e) relevance of optical smoke data to hazard assessment.
IEC 60695-6-2Provides a summary of the test methods that are used in the assessment of smoke obscuration. It presents a brief summary of static and dynamic test methods in common use, either as international standards or national or industry standards.
IEC 60695-7-1Provides guidance on the factors which affect the toxic hazard from fires involving electrotechnical products, and provides information on the methodologies recommended by ISO TC 92 (SC 3) for estimating and reducing the toxic hazard from fires, as expressed in ISO 19706, ISO 13344 and ISO 13571.
IEC 60695-7-2Gives a brief summary of the test methods that are in common use in the assessment of acute toxic potency, and other toxicity tests. It includes special observations on their relevance to real fire scenarios and gives recommendations on their use. It advises which tests provide toxic potency(...)
IEC 60695-7-3Concerns laboratory tests used to measure the toxic components of the fire effluent from either electrotechnical products or materials used in electrotechnical products. It provides guidance on the use and interpretation of results from such tests.
IEC 60695-7-50Describes a test method for the generation of fire effluent and the identification and measurement of its constituent combustion products. It uses a moving test specimen and a tube furnace at different temperatures and air flow rates as the fire model.
IEC 60695-8-1Provides guidance on the measurement and interpretation of heat release from electrotechnical products and materials from which they are constructed.
IEC 60695-9-1Provides guidance for the assessment of surface spread of flame for electrotechnical products and the materials from which they are formed. It provides an explanation of the principles of flame spread for both liquids and solids, guidance for the selection of test methods, guidance on the use(...)
IEC 60695-9-2Presents a summary of published test methods that are used to determine the surface spread of flame of electrotechnical products or materials from which they are formed. It represents the current state of the art of the test methods and, where available, includes special observations on their(...)
IEC 60695-10-2Specifies the ball pressure test as a method for evaluating the softening temperature and accelerated material flow under load of polymeric materials and parts of end products in their ability to resist abnormal heat. It is applicable to the materials used in electrotechnical equipment,(...)
IEC 60695-11-2Gives the requirements for the production and confirmation of a nominal 1 kW, propane/air pre-mixed test flame. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
IEC 60695-11-3Provides detailed requirements for the production of either of two 500 W nominal, pre-mixed type test flames. The approximate overall height of each flame is 125 mm.
IEC 60695-11-4Provides a description of the apparatus required to produce a 50 W test flame and a description of a calibration procedure to check that the test flame produced meets given requirements.
IEC 60695-11-5Specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating(...)
IEC 60695-11-10Specifies small-scale laboratory test procedures intended to compare the burning behaviour of different materials used in electrotechnical products when vertically or horizontally oriented test bar specimens are exposed to a small flame ignition source with a nominal thermal power of 50 W.
IEC 60695-11-20Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of specimens made from plastics and other non-metallic materials, as well as their resistance to burn-through when exposed to a flame ignition source of 500 W nominal power.
IEC 60704-1Applies to electric appliances (including their accessories or components) for household and similar use, supplied from mains or from batteries
IEC 60709Defines the technical requirements to be met for I&C systems important to safety and their cables, in order to achieve adequate physical separation between redundant sections of a system and between a system and another system.
