IEC 60335-2-104Deals with the safety of electrical appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment incorporating open drive or motor-compressors. The maximum rated voltage being not more than 250V for single phase appliances and 600V for all other appliances.
IEC 60335-2-105Deals with the safety of electric multifunctional shower cabinets for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.
IEC 60335-2-106Deals with the safety of heating units to heat the room in which they are located and that are intended to be installed directly under a floor covering that is itself intended to be removable; their rated voltage being not more than 250 V for single-phase installations and 480 V for other(...)
IEC 60335-2-108Deals with the safety of electrolysers that produce low viscosity, ionized liquids intended for use as detergent free wash water in appliances for household and similar purposes and which conform with the standards applicable to such appliances.
IEC 60335-2-109Deals with the safety of UV radiation water treatment appliances for household and similar purposes, their rated voltage being not more than 250 V.
IEC 60364-4-41Specifies essential requirements regarding protection against electric shock of persons and livestock. It deals also with the application and co-ordination of these requirements in relation to external influences.
IEC 60364-4-42IEC 60364-4-42:2010+A1:2014 applies to electrical installations with regard to measures for the protection of persons, livestock and property against:- thermal effects, combustion or degradation of materials, and risk of burns caused by electrical equipment,- flames in case of a fire hazard(...)
IEC 60364-5-51Deals with the selection of equipment and its erection. It provides common rules for compliance with measures of protection for safety, requirements for proper functioning for intended use of the installation, and requirements appropriate to the external influences foreseen.
IEC 60364-5-52Deals with the selection and erection of wiring systems.
IEC 60364-7-712Apply to the electrical installations of PV power supply systems including systems with AC modules
IEC 60364-7-753IEC 60364-7-753:2014 applies to embedded electric heating systems for surface heating. It also applies to electric heating systems for de-icing or frost prevention or similar applications.
IEC 60364-8-1IEC 60364-8-1:2014 provides additional requirements, measures and recommendations for the design, erection and verification of all types of low-voltage electrical installation including local production and storage of energy for optimizing the overall efficient use of electricity.
IEC 60412Gives guidelines for scintillation detectors nomenclature (identification) and standard dimensions of scintillators. Is applicable to all types of solid organic and inorganic scintillators used in detectors for scintillation counting and spectrometry.
IEC 60462IEC 60462:2010(E) establishes test procedures for photomultiplier tubes (PMT) for scintillation and Cherenkov detectors.
IEC 60498Applies to coaxial connectors associated with electrical measuring instruments used in nuclear instrumentation. Establishes standard dimensions of the mating parts, construction and mounting rules, voltage rating and test voltages, mininium insulation requirements, maximum contact resistances(...)
IEC 60502-2IEC 60502-2:2014 specifies the construction, dimensions and test requirements of power cables with extruded solid insulation from 6 kV up to 30 kV for fixed installations such as distribution networks or industrial installations.
IEC 60515Describes characteristics and tests methods for gas-filled radiation detectors used for the protection of nuclear reactors. Applies to the radiation detectors which are installed external to the core of nuclear reactors and which provide electrical input signals to the reactor's control and(...)
IEC 60528Applicable to non-dispersive infra-red analyzers specified for installation either indoors or outdoors and used for the continuous determination of certain aspects of air quality by measuring the gaseous constituents.
IEC 60529Applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72,5 kV.
IEC 60532Applies to installed dose rate meters, warning assemblies and monitors that are used to prevent or mitigate a minor radioactive release, or minor degradation of fuel, within the nuclear power plants/nuclear facility design basis, and to warn personnel or to ensure their safety during or(...)
