Two Pin HBM Testing: A New Option?

Human Body Model (HBM) is the original ESD test method for semiconductor devices and is still the most widely used ESD test . This article will discuss the old, but now new Two Pin HBM Tester. Not only are the ... Read More...

Device Failure from the Initial Current Step of a CDM Discharge

CDM discharges exhibit a fast initial current step when the stray capacitance of the pogo pin is charged. It is demonstrated that the high slew rate can damage sensitive gate oxides. The miscorrelation of CDM and CC-TLP methodologies is addressed by applying pulses with 20 ps rise time.

Why You Should Pay Attention to Cable Discharge Events (CDE)

Cable discharge events occur more frequently than we think, but they often go unrecognized or undiagnosed for root causes, resulting in unnecessary device failures. This article discusses the origins of three types of cable discharge events.

Radio-Enabled Products Using Radio Modules: Part Two

In this second part of a two-part article, we’ll discuss the use of radio modules to enable wireless connectivity of electronic and consumer products, and how to approach radio, EMC and safety regulatory approvals in the European Union for radio modules and equipment which contain radio modules.

Let’s Talk About… The Value of Pre-compliance Testing

Without much effort and expense, it is possible to perform pre-compliance testing in a manner that saves considerable time and money without commercial or financial risks associated with purchasing a full-compliance test facility.

Radio-Enabled Products Using Radio Modules

In this first part of a two-part article, we’ll discuss the use of radio modules to enable wireless connectivity of electronic and consumer products, and how to approach radio, EMC and safety regulatory approvals in North America for radio modules and equipment which contain radio modules.

Radio and EMC Testing Considerations

Understanding radio compliance and electromagnetic compatibility (EMC) issues to help ensure that products meet regulatory testing requirements and customer expectations.

Lossy Material Quiets Leaky Air Vents

This article presents the results of experiments to measure the effectiveness of lossy material in reducing RF emissions from perforated air vents such as those commonly used on computer enclosures. The results show good performance compared to those with conventional metal vents.