failed emissions test

The equipment should have passed the emissions scan. It should not be susceptible to this noise. The filter analysis said this was not a problem. The case should be an excellent shield. Why doesn’t this pass?

There are two statements I have heard about electromagnetic interference which are both related and true: EMC is the science and engineering of things that are typically not on the schematic [1], and EMI is often caused by issues of geometry [2]. The first statement speaks to the issues of parasitics, or cross coupling of energy due to magnetic induction or capacitance. The second says that the parasitics can be controlled or reduced if the proper routings and separations are maintained, and that once a degree of understanding about these coupling mechanisms is understood the control of them can be obtained.