chambers

This article describes the design and performance of a wide-band hybrid antenna suitable for use in reverberation chambers. The antenna is characterized over the frequency range 100 MHz to 25 GHz showing that it performs well above 200 MHz although its ultimate highest operating frequency has not been established.

A method of determining the performance of an open area test site (OATS) or an anechoic chamber is to perform a site attenuation measurement. The process used is to step a signal source at the transmitting antenna and use a receiver or spectrum analyzer at the receiving antenna. The two are stepped together to give a set of data that shows the performance of the test site or chamber. ANSI C63.4 outlines the process for performing normalized site attenuation (NSA) measurements. In these measurements, the spectrum analyzer controls the signal source.