bogdan adamczyk

This column explores the conducted immunity test known as a Bulk Current Injection (BCI) test, according to ISO 11452-4 specification.

This article discusses a practical approach to designing an input filter to the switch-mode power supply (SMPS).

We compare the shielding effectiveness of various solid metallic shields by direct H-field measurements in the near field of the source.

In this article we investigate the frequency behavior of a ceramic capacitor.

This article discusses the crosstalk reduction between PCB traces by utilizing a guard trace between the traces and investigating the effect of the guard trace grounding.

For common-impedance coupling to occur, two circuits must share a current path (with a non-negligible impedance)

This article is devoted to the radiated emissions measurements. These measurements can be performed either at the Open Area Test Site (OATS) or in an Absorber-Lined Shielded Enclosure (ALSE).

The article discusses the behavior of voltage and current waves on a transmission line with different types of loads and explains how to measure the VSWR of an antenna.

This article is devoted to the current method of the conducted emissions measurements.

This article focuses on the current probes used in EMC measurements and testing.