i
Search:
(clear)
Specifies requirements and makes recommendations for the design and development, integration and validation of PDS(SR)s in terms of their functional safety considerations.
Provides a guide for HAZOP studies of systems utilizing the specific set of guide words defined in this standard. Also gives guidance on application of the technique and on the HAZOP study procedure, including definition, preparation, examination sessions and resulting documentation and follow-up.
Defines an installed monitor for the control and detection of radioactivity of gamma emitters contained in recyclable or non-recyclable materials transported by vehicle, the conceptual requirements, general characteristics, mechanical characteristics, environmental conditions, minimal(...)
Specifies the process and requirements to declare the environmental aspects concerning uninterruptible power systems (UPS), with the goal of promoting reduction of any adverse environmental impact during a complete UPS life cycle.
IEC 62047-20:2014 specifies terms and definitions, ratings and characteristics, and measuring methods of gyroscopes. Gyroscopes are primarily used for consumer, general industries and aerospace applications. MEMS and semiconductor lasers are widely used for device technology of gyroscopes.
Specifies requirements and makes recommendations for the design, integration and validation of safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines (see Notes 1 and 2).
Deals with the safety of toys that have at least one function dependent on electricity. Examples of toys within the scope of this standard are: constructional sets; experimental sets; functional toys (having a function similar to an appliance or installation used by adults) and video toys(...)
Covers insulating ropes that are utilized during live working procedures in contact with parts of installations operating at voltages up to and including 800 kV r.m.s.
Covers telescopic sticks and telescopic measuring sticks to be used for live working on a.c. or d.c. electrical installations at 1 000 V and above for a.c. and 1 500 V and above for d.c.
Addresses the evaluation of RF field strength or specific absorption rate levels in the vicinity of non-broadcast RF radiocommunication sources (i.e. RBS) intentionally radiating in the frequency range 300 MHz to 6 GHz according to the scope (see Clause 1).
Is applicable to mobile insulating hoses with fittings used with hydraulic tools and equipment for live working at nominal voltages exceeding 1 kV r.m.s. at power frequency. Insulating hoses with fittings are used to provide a connection between the hydraulic tool and the pump which are at(...)
Defines the performance of installed monitors used for the detection of gamma and neutron radiation emitters contained in objects/ containers or vehicles, general characteristics, mechanical characteristics, environmental requirements, test procedures and documentation.
IEC 62282-4-101:2014 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks. This standard is limited to electrically powered industrial trucks and is applicable to material-handling equipment, e.g. forklifts. It applies to gaseous(...)
Is applicable to equipment used for sampling and continuous measurement of radioactive noble gases in the workplace, in gaseous effluents discharged into the environment as well as in the environment itself.
Applicable to equipment used for sampling and continuous measurement of tritium in the workplace, in gaseous effluents discharged into the environment as well as in the environment itself and it is applicable to installed, portable and transportable equipment.
Specifies the determination of the levels of lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr(VI)) contained in inorganic and organic compounds, and two types of brominated flame retardants, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) contained in(...)
IEC 62353:2014 applies to testing of medical electrical equipment and medical electrical systems, hereafter referred to as ME equipment and ME systems, or parts of such equipment or systems, which comply with IEC 60601-1:1988 (second edition) and its amendments and IEC 60601-1:2005 (third(...)
Applies to all kinds of passive dosimetry systems that are used for measuring the personal dose equivalent (for whole body dosimetry), the personal dose equivalent (for eye lens dosimetry), the personal dose equivalent (for both whole body and extremity dosimetry), the ambient dose equivalent(...)
Describes design and functioning criteria along with testing methods for evaluating the performance of instruments for detection of illicit trafficking of radioactive material (for example, for border radiation monitoring).
Specifies requirements and procedures to integrate environmental aspects into design and development processes of electrical and electronic products, including combination of products, and the materials and components of which they are composed.
Applicable to mobile radiation detection systems used for the detection, quantification and identification of photon and/or neutron emitters in the environment.
Lays down standard requirements and also specifies general characteristics, general test procedures, radiation characteristics, electrical characteristics, environmental influences, mechanical characteristics, safety requirements; provides examples of acceptable methods in terms of dose to the(...)
Specifies the procedure, content, and form relating to material declarations for products of companies operating in and supplying the electrotechnical industry. Process chemicals and emissions during product use are not in the scope of this International Standard.
Specifies the operational and performance requirements for spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material.
Applies to radiographic inspection systems with photon radiation energy of at least 500 keV for inspection of cargo, vehicles and cargo containers.
Applies to hand-held instruments used for the detection and localization of radioactive photon emitting materials.
Applies to hand-held instruments used for the detection and localization of neutron emitting radioactive material.
Specifies generic terms and definitions that are related to environmental standardization within the IEC. It serves as a glossary of terminology to be considered for environmental aspects of relevant work in IEC.
Applies to a single stand-alone broadcast transmitter operating in the frequency range 30 MHz to 40 GHz when put on the market. The objective of the standard is to specify, for such equipment operating in typical conditions, the method for assessment of compliance distances according to the(...)
Specifies environmental test methods to be used for testing the system components of the following alarm systems, intended for use in and around buildings