i
Search:
(clear)
Describes a method for calculating the minimum approach distances for live working, at maximum voltages between 72,5 kV and 800 kV. This standard addresses system overvoltages and the working air distances or tool insulation between parts and/or workers at different electric potentials.
Gives the minimum requirements relative to specification, manufacture, selection, application and maintenance of tools, devices and equipment for live working. It provides the type of information which is useful to skilled persons in order to make the use of tools, devices and equipment safer.
Is applicable to fully insulating spliced or hook ladders with extension or having a combination of insulating and conductive sections and used for live working on a.c. or d.c. electrical installations at 1 000 V and above for a.c. and 1 500 V and above for d.c. This standard concerns only(...)
Is applicable to flexible insulating covers (line hoses) for the protection of workers from accidental contact with live or earthed electrical conductors and for the avoidance of short circuits during live working.
Is applicable to portable phase comparators with or without a built-in power source to be used on electrical systems for voltages from 1 kV to 36 kV a.c. and frequencies from 50 Hz to 60 Hz. This standard is applicable to two-pole phase comparators having a connecting lead between them,(...)
Specifies test methods to measure the arc thermal performance value of materials intended for use in heat- and flame-resistant clothing for workers exposed to the thermal effects of electric arcs and the function of garments using these materials.
This part of IEC 61482 specifies methods to test material and garments intended for use in heat- and flame-resistant clothing for workers exposed to electric arcs. In contrast to the test methods in IEC 61482-1-1 a directed and constrained electric arc in a low voltage circuit is used to(...)
Applicable to protective clothing used in work if there is an electric arc hazard. Specifies requirements and test methods applicable to materials and garments for protective clothing for electrical workers against the thermal hazards of an electric arc based on: relevant general properties of(...)
Specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system.
Specifies requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety-related system, employing active opto-electronic protective devices (AOPDs) for the sensing function.
Specifies additional requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system, employing active opto-electronic protective devices responsive to diffuse(...)
Covers those aspects to be considered when electrical/electronic/programmable electronic (E/E/PE) systems are used to carry out safety functions
Gives requirements for the specification, design, installation, operation and maintenance of a safety instrumented system, so that it can be confidently entrusted to place and/or maintain the process in a safe state.
Provides guidance on the specification, design, installation, operation and maintenance of Safety Instrumented Functions and related safety instrumented system as defined in IEC 61511-1.
Specifies general characteristics, general test procedures, radiation characteristics as well as electrical, mechanical, safety and environmental characteristics. The only requirements specified for associated readout systems are those which affect its accuracy of readout of the personal dose(...)
IEC 61558-2-10:2014 deals with the safety of separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V. Transformers incorporating electronic circuits are also covered by this standard.
Specifies general characteristics, general test procedures, radiation, electrical, safety, and environmental characteristics and the identification certificate for centralized systems intended for continuous monitoring of radiation and/or levels of radioactivity installed in nuclear(...)
Identifies requirements pertinent to the integration of the monitoring functions into a centralized system. Considers requirements for general and design characteristics, electrical performance requirements and tests, mechanical performance requirements and tests, software performance(...)
Applies to apparatus for the non-destructive measurement of radioactive contamination of fur and other cloth samples for the presence of gamma emitting radionuclides.
Specifies the main performance characteristics of instruments intended for measurement of specific activity of beta-emitting radionuclides in foodstuffs, their methods of testing and documentation requirements.
Specifies the main performance characteristics of instruments, intended for measurement of specific activity of gamma-emitting radionuclides in foodstuffs, their methods of testing and documentation requirements.
Addresses the instruments and associated methods for measuring isotopes 220 and 222 of radon and their subsequent short-lived decay products in gases
Specifies the main performance characteristics of instruments intended for measurement of airborne radon volume activity, their specific method of testing and documentation requirements. Is to be used with IEC 61577-1.
Describes the specific requirements for instruments measuring the volumetric activity of airborne short-lived radon decay products and/or their ambient potential alpha-energy concentration outdoors, in dwellings, and in workplaces including underground mines.
Concerns the System for Test Atmospheres with Radon (STAR) needed for testing, in a reference atmosphere, the instruments measuring radon and RnDP. Provides guidance for those facing problems associated with the production of equipment for setting up reference atmospheres for radon and its(...)
Defines type test methods permitting calibration and measurement of the effectiveness of radon daughters' compensation of radioactive aerosol monitors.
Specifies the classification, general design requirements, performance characteristics and test procedures for in vivo counting systems for detecting trace amounts of radionuclides in the bodies of persons working in nuclear power plants, laboratories and facilities handling radionuclides, and(...)
Specifies general characteristics, general test procedures, electrical, safety and environmental characteristics and the identification certificate for installed, portable or transportable assemblies intended to measure a) the direction of an X or gamma radiation source in terms of azimuth and(...)
Specifies a method for the determination of polychlorinated biphenyl (PCB) concentration in non-halogenated insulating liquids by high-resolution capillary column gas chromatography using an electron capture detector (ECD).
Specifies a safety communication layer (services and protocol) based on CPF 18 of IEC 61784-2 and IEC 61158 Type 22. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer.