Provides guidance on the design, planning, operation, installation, commissioning and maintenance of intrusion and hold-up alarm system (I&HAS) installed in buildings. Requirements for I&HAS are specified in IEC 62642-1:2010. It also applies to intruder alarm system and hold-up alarm system(...)
Applies to all types of counting dosemeters, irrespective of the measuring quantity and the type of radiation intended to be measured. It ensures that a single radiation pulse can be correctly measured even if the dosemeter is in the internal state relevant for measuring background or(...)
Standard for Ethernet Amendment 2: Physical Layer Specifications and Management Parameters for 100 Gb/s Operation Over Backplanes and Copper Cables.
Describes hazards generated by laser processing machines, and specifies the safety requirements relating to radiation hazards and hazards generated by materials and substances. It also specifies the information to be supplied by the manufacturers of such equipment.
Specifies functional requirements and design principles for the emergency stop function on machinery, independent of the type of energy used to control the function.
Defines terminology relating to fire safety as used in International Standards and other documents of the International Standardization Organization and the International Electrotechnical Commission.
Provides guidance on addressing environmental issues in product standards. It is primarily intended for product standards writers.
These requirements cover indoor use cord and plug connected, relocatable power taps (RPT) rated 250 V AC or less and 20 Amperes or less. RPT are for use as a movable power supply connection for cord and plug connected electrical utilization equipment in accordance with the National Electric(...)
This Standard is intended to reduce the risk of fire, electric shock, or injury to persons from installed equipment, both as a single unit or as a system of interconnected units, subject to installing, operating, and maintaining the equipment in the manner prescribed by the manufacturer.
This standard applies to quick-connect terminals, both connectors and tabs, having nominal widths of 2.8, 3.2, 4.8, 5.2, and 6.3 mm (0.110, 0.125, 0.187, 0.205, and 0.250 in). They are intended for internal wiring connections in electrical equipment and for the field termination of conductors(...)
UL 607320-2-12 applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use.
UL 60730-2-13 applies to automatic electrical humidity sensing controls for use in, on or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar(...)
These requirements cover adhesive-attached labels for use as permanent nameplates or markers; bearing information, instructions, or identification in the form of text or pictographs. The adhesive may be pressure-sensitive, heat-activated, or solvent-activated. These labels are intended to be(...)
These requirements cover household cooking equipment that is floor or cabinet supported, wall-mounted, counter mounted, or combinations thereof, rated 600 V or less, for installation in accordance with the National Electrical Code.
UL 962A applies to cord-connected, indoor use, furniture power distribution units (FPDU) that consist of single or multiple outlet wiring devices that provide power for and are intended to be installed in commercial or household (residential) portable or stationary furnishings only.