Specifies the general requirements for the design and the implementation of microgrids used in decentralized rural electrification to ensure the safety of persons and property and their satisfactory operation according to the scheduled use.
Specifies the general requirements for the design and the implementation of the interface equipment within the user's installation which connects to a microgrid or the generating part of a standalone system.
Specifies the general requirements for the design and the implementation of a user's installation. Applies to single phase user's electrical installations with maximum power of 500 VA, in decentralized rural electrification systems.
IEC/TS 62257-9-5:2013(E) applies to stand-alone rechargeable electric lighting appliances or kits that can be installed by a typical user without employing a technician. This technical specification presents a quality assurance framework that includes product specifications (a framework for(...)
IEC 62257-9-6:2008(E) proposes a simple selection procedure and cheap, comparative tests which can be performed in laboratories of developing countries, in order to identify the most suitable model of small Photovoltaic Individual Electrification Systems (PV- IES) up to 500 Wp for a particular(...)
IEC/TS 62282-1:2013 provides uniform terminology in the forms of diagrams, definitions and equations related to fuel cell technologies in all applications including but not limited to stationary power, transportation, portable power and micro power applications.
IEC/TS 62282-7-1:2010(E) covers cell assemblies, test apparatus, measuring instruments and measuring methods, performance test methods, and test reports for PEFC single cells.
IEC/TS 62548:2013(E) sets out design requirements for photovoltaic (PV) arrays including d.c. array wiring, electrical protection devices, switching and earthing provisions. The scope includes all parts of the PV array up to but not including energy storage devices, power conversion equipment(...)
IEC/TS 62600-1:2011(E) defines the terms relevant to ocean and marine renewable energy. For the purposes of this Technical Specification, sources of ocean and marine renewable energy are taken to include wave, tidal current, and other water current energy converters.
IEC/TS 62600-100:2012(E) provides a method for assessing the electrical power production performance of a Wave Energy Converter (WEC), based on the performance at a testing site. Provides a systematic method which includes: measurement of WEC power output in a range of sea states; WEC power(...)
IEC/TS 62600-200:2013(E) provides the following items: a systematic methodology for evaluating the power performance of tidal current energy converters (TECs) that produce electricity for utility scale and localized grids; a definition of TEC rated power and rated water velocity; a methodology(...)
IEC/TS 62727:2012(E) provides guidelines for the parameters to be specified for solar trackers for photovoltaic systems and provides recommendations for measurement techniques. The purpose of this test specification is to define the performance characteristics of trackers and describe the(...)
UL 3730 requirements cover photovoltaic junction boxes intended for factory and field wiring and may include conduit openings, wiring leads, and/or photovoltaic connectors intended for interconnection of PV modules.