i
Search:
(clear)
Describes the process of the measurement of the radar cross section of objects using a test range. The term "radar cross section" is defined, and the characteristics of different types of test ranges are given. The responsibilities of the test range operators are shown to involve test and(...)
Protocols and test procedures are specified for the measurement of the peak spatial-average SAR induced inside a simplified model of the head of users of certain handheld radio transceivers. These transceivers are intended to be used for personal wireless communications services, operate in(...)
This amendment addresses certain text ambiguities in IEEE Std 1528-2003 and provides CAD files for the human head model that were not included with the base standard.
Uniform methods of measurements of radio-frequency power-line interference filter attenuation performance in the range of 100 Hz to 10 GHz are set forth. Nonloaded and loaded attenuation measurements are presented with varying source impedance, including radiofrequency current injection with(...)
A method to validate computational electromagnetics computer modeling and simulation techniques, codes, and models is defined in this standard. It is applicable to a wide variety of electromagnetic applications including, but not limited to, the fields of electromagnetic compatibility, radar(...)
This recommended practice is a companion document for IEEE Std 1597.1-2008. Examples and problem sets to be used in the validation of computational electromagnetics (CEM) computer modeling and simulation techniques, codes, and models are provided. It is applicable to a wide variety of(...)
Electromagnetic compatibility (EMC) criteria and consensus test and measurements procedures for broadband over power line (BPL) communication equipment and installations are presented. Existing national and international standards for BPL equipment and installations are referenced. This(...)
This guide discusses the collection, categorization, and use of information related to electric power distribution interruption events and will be used in the development of industry guidelines. This guide presents a minimal set of data and a consistent categorization structure that, when used(...)
This standard provides definitions and explanations of key concepts in the fields of spectrum management, cognitive radio, policy-defined radio, adaptive radio, software-defined radio, and related technologies. The document goes beyond simple, short definitions by providing amplifying text(...)
Technical guidelines are provided in this recommended practice for analyzing the coexistence or, alternatively, the interference between radio systems, operating in the same spectrum assignment or between different spectrum assignments.
The building blocks comprising (i) network resource managers, (ii) device resource managers, and (iii) the information to be exchanged between the building blocks, for enabling coordinated network-device distributed decision making that will aid in the optimization of radio resource usage,(...)
Terms and definitions used in the context of electromagnetic wave propagation relating to the fields of telecommunications, remote sensing, radio astronomy, optical waves, plasma waves, the ionosphere, the magnetosphere, and magnetohydrodynamic, acoustic, and electrostatic waves are supplied.
EEE 2700 provides a common framework for sensor performance specification terminology, units, conditions and limits is provided. Specifically, the accelerometer, magnetometer, gyrometer/gyroscope, barometer/pressure sensors, hygrometer/humidity sensors, temperature sensors, ambient light(...)
Uniform measurement procedures and techniques are provided for determining the effectiveness of electromagnetic shielding enclosures at frequencies from 9 kHz to 18 GHz (extendable to 50 Hz and 100 GHz, respectively) for enclosures having all dimension greater than or equal to 2.0 m. The types(...)
Provides uniform measurement procedures for determining the shielding effectiveness of electromagnetic (EM) shielding for a variety of enclosures and boxes having all dimensions between 0.1 and 2 meters in the radio frequency range not addressed by IEEE 299-2006. This standard is divided into(...)
Measurements of the electrical properties of naturally occurring solids are covered in the scope of this project. Not covered are methods that rely on mapping earth structure anomalies unless directly related to electrical properties. Coverage of numerical methods for forward/inverse modeling(...)
Covers definitions of terms, controlled test conditions, test apparatus, test methods and data presentation, all of which form the basis for establishing the energy levels of spurious emissions of mobile communication transmitters designed to generate frequency-modulated (FM) signals in the(...)
Test procedures for microwave field disturbance sensors to measure radio frequency (RF) radiated field strength of the fundamental frequency, harmonic frequencies, near field power flux density, and nonharmonic spurious emissions of sensors operating within the frequency range of 300 MHz to 40(...)
Uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (AC) overhead power lines and for the calibration of the meters used in these measurements are established. The procedures apply to the measurement of electric and magnetic fields(...)
IEEE 802.19.1 specifies radio technology independent methods for coexistence among dissimilar or independently operated wireless networks operating in TVwhite space (TVWS).
Standard for Ethernet Amendment 2: Physical Layer Specifications and Management Parameters for 100 Gb/s Operation Over Backplanes and Copper Cables.
IEEE Standard for Ethernet Amendment 1: Physical Layer Specifications and Management Parameters for 100 Mb/s Operation over a Single Balanced Twisted Pair Cable (100BASE-T1). This standard deals with the 100BASE-T1 Physical Layer (PHY) specifications and management parameters for(...)
Design tests for relays and relay systems that relate to the immunity of this equipment to Radiated Electromagnetic Interference from Transceivers are specified. Field strength, test frequencies, modulation, sweep rates, equipment setup and connection, test procedures, criteria for acceptance,(...)
This standard republishes CISPR 11:1997 (with Amendment 1, 1999-05) as an American National Standard to make it easily available to U.S. manufacturers.
The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence(...)
This standard set forth, at least for reference purposes, a suggested set of EMC limits which may find general applications. As part of the development of limits, the following parameters should be considered: an understanding of the devices commonly used for the measurement of radio noise and(...)
This recommended practice presents a rationale for developing limits and recommends sets of limits that are representative of current practice. These limits may be adjusted in particular applications as circumstances dictate.
A basic understanding of the application, evaluation, and safety considerations of electromagnetic interference (EMI) power-line filters used in both AC and DC applications is provided. The construction of an EMI power-line filter and its functions in providing suppression of conducted noise(...)