i
Search:
(clear)
IEC 62747:2014 defines terms for the subject of self-commutated voltage-sourced converters used for transmission of power by high voltage direct current (HVDC).
Provides a uniform format for data to be output from radiation measurement instruments for use in detection of illicit trafficking of radioactive materials.
IEC 62761:2014-02 gives the measurement method for nonlinear signals generated in the radio frequency (RF) surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices such as filters and duplexers, which are used in telecommunications, measuring equipment, radar systems and consumer products.
IEC Guide 109:2012 is intended for standards writers and gives guidance on how to consider aspects relating to the impact on the environment of electrotechnical products when preparing standards for such products.
This IEC Technical Specification pertains to Photovoltaic (PV) modules – Cyclic (dynamic) mechanical load testing.
IEC/IEEE 62582-1:2011 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. It also includes requirements which are common to all methods.
IEC/IEEE 62582-2:2011 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using the indenter modulus technique in the detail necessary to produce accurate and reproducible measurements.
IEC/IEEE 62582-3:2012 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using tensile elongation techniques in the detail necessary to produce accurate and reproducible measurements.
IEC/IEEE 62582-4:2011 specifies methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using oxidation induction techniques in the detail necessary to produce accurate and reproducible measurements.
Describes the form and procedure relating to the declaration of materials in products of companies operating in the electrotechnical and electronic industry (E&E industry) and its supplier industry, including the operational materials contained in the products.
Is a Publicly Available Specification (PAS) giving guidance for the use of renewable energies in rural decentralized electrification. Describes the functional specifications on which the design, implementation, and exploitation of the constituent parts of these electrification systems should(...)
IEC/PAS 62282-6-150:2011(E) covers micro fuel cell power systems using hydrogen produced from the reaction of an aqueous solution with solid UN Division 4.3 (water-reactive) compounds in indirect PEM fuel cell systems that are wearable or easily carried by hand, providing d.c. outputs that do(...)
This PAS provides guidelines on generic environmental attributes to be considered by product committees when preparing a declaration frame suited to a concerned product category to disclose credible, relevant, and harmonized product related environmental information to who needs or requests it.
Establishes a system of uniform, repeatable procedures and standard methods for measuring specified product characteristics of portable household electric room air cleaners.
Provides general sampling guidelines and strategies of sampling for electrotechnical products, electronic assemblies, electronic components.
Provides basic guidance on the effects of electric currents on livestock for use in the establishment of electrical safety requirements. Indicates values for the electrical impedance of the body of livestock as a function of touch voltage, the degree of moisture of the hide or skin and the(...)
Summarizes the basic parameters for lightning and their variability insofar as they apply to human beings and livestock.
Provides touch voltage-duration combination thresholds based on analysis of information concerning body impedances and current thresholds of physiological effects, as given in IEC/TS 60479-1. Such threshold combinations relate to specific environmental and contact conditions that determine(...)
Provides a summary of test methods that are used to determine the ignitability of electrotechnical products or materials from which they are formed. I
Reviews the work of IEC SC 50D, and latterly IEC TC 89, in the development of higher quality, more reproducible small test flames. It examines the series of elements that together make up a small laboratory scale test for the examination of burning behaviour and shows how these parameters have(...)
Presents a summary of published test methods that are relevant to determine heat release for electrotechnical products. It represents the current state of the art of the test methods and, where available, includes special observations on their relevance and use.
IEC/TR 61000-4-32 provides information about extant system-level high-altitude EMP (HEMP) simulators and their applicability as test facilities and validation tools for immunity test requirements. This report provides the first detailed listing of HEMP simulators throughout the worldand is the(...)
IEC/TR 61000-4-35:2009(E) provides information about extant system-level High-Power Electromagnetic (HPEM) simulators and their applicability as test facilities and validation tools for immunity test requirements in accordance with the IEC 61000 series of standards. HPEM simulators with the(...)
This technical report covers general considerations and guidelines on mitigation methods aimed at ensuring electromagnetic compatibility (EMC) among electrical and electronic apparatus or systems used in industrial, commercial, and residential installations. This technical report is intended(...)
This technical report (type 3) covers guidelines for the earthing and cabling of electrical and electronic systems and installations aimed at ensuring electromagnetic compatibility among electrical and electronic apparatus or systems. More particularly, it is concerned with earthing practices(...)
This technical report provides elements for: - the design of an adequate protection for civil facilities against the electromagnetic pulse due to a high altitude nuclear explosion, denoted in what follows by HEMP; - the evaluation of already existing protections with respect to stresses(...)
This Technical Report covers guidelines for the mitigation of external electromagnetic influences impinging upon a facility, aimed at ensuring electromagnetic compatibility (EMC) among electrical and electronic apparatus or systems. These influences include lightning, RF transmitters,(...)
Provides recommendations for the selection and testing where necessary of conductor stringing equipment and accessory items used for the installation of overhead conductors and overhead earthwires.
Provides information related to the design, construction and testing of electro-sensitive protective equipment (ESPE) that employs vision-based protective devices (VBPDs) for the sensing function for the safeguarding of machinery.