The new R&S NGE100 power supplies are very small, compact and quiet. The galvanically separated channels can be switched in series or in parallel to increase either the output voltage or the output power. The power supplies also offer configurable overload protection.
All channels are galvanically separated, earth free and electrically identical, so that even complex switching operations can be performed without grounding problems. Users can switch the channels in series or in parallel. Two channels switched in series deliver an output voltage up to 64 V, three channels up to 96 V. When the channels are switched in parallel, the instrument supplies a maximum of 6 A for two channels and 9 A for three.
Maximum values for current, voltage and power configurable for each channel
The R&S NGE100 provides very flexible protection options. Users can enter maximum values for voltage, current and power separately for each channel. The electronic fuses can also be linked with other channels. All linked channels will be switched off as soon as one of the linked channels reaches a limit. Users can define a delayed response time to prevent the power supply from switching off in the event of a short current spike.
Remote control for rack installation
The small, compact power supplies can be used on the benchtop or mounted in a 19″ rackmount (with a rack adapter). They can be remote controlled via the integrated USB interface or optionally via LAN or WLAN. A digital trigger option is also available. A key code activates the options.
