The growing application of lithium-ion batteries brings with it an increased risk of unanticipated energy releases and thermal runaway. Quantifying battery energy release characteristics during product design can help mitigate those risks.
Most EMI issues are caused by a resonance that is excited somewhere in the system. It may be a resonance of a cable acting as an antenna or a heatsink energized by the power electronics switches bolted to it, becoming a good radiator. In this article, we look at the indicators that signal the presence of structural resonances and provide techniques for fixing the EMI issues. Practical case studies are presented to demonstrate the techniques.
The growing application of lithium-ion batteries brings with it an increased risk of unanticipated energy releases and thermal runaway. Quantifying battery energy release characteristics during product design can help mitigate those risks.
Implementing a process of EMC compliance for a specific project is much more than simply ensuring that the design engineers follow a long list of “do’s and don’ts” in the form of EMC design rules. Following this process will reap benefits when EMC performance is evaluated at the end of the design process.
The selection of component values for common mode filters need not be a difficult and confusing process. The use of standard filter alignments can be utilized to achieve a relatively simple and straightforward design process, though such alignments may readily be modified to utilize pre-defined component values.
Secure facility designs often comingle ICS/ICD-705 and NSA 94-106 performance requirements creating project confusion with significant design and cost implications. This article focuses on bringing some clarity to the differences between ICS/ICD-705 design guidance and NSA 94-106 performance requirements. The related secure facility design and construction process is also reviewed.
The 2003 Columbia re-entry accident was caused by a piece of liberated external tank foam that struck and damaged the left leading edge during powered ascent. Computational and experimental electromagnetics were ultimately applied to foster the development of a new NASA Ascent Debris Radar (NDR) for the remaining 22 Shuttle missions. In the process, countless static and dynamic radar signature and EMI/EMC calculations and tests were completed to assure this safety-critical radar system was ready for the return to flight (RTF) missions.
Traditionally, the start of a new year is a time when we reflect on the progress we’ve made during the year passed and set our goals for the new year. We’ve queried training resources in our industry to provide you with an overview of free or affordable solutions to meet your training goals in 2022.
For engineers new to the field of EMC, the road can look very steep indeed. But, with a plan (and some work!), you can grow from EMC novice to EMC expert.
This article presents the fundamentals and application of capacitors. What is a capacitor, and how do we select them? Techniques of selecting capacitors and things to consider when using capacitors are highlighted. Both practical examples and simulation are used to demonstrate the key points.
Heat flow analysis for semiconductor ESD situations can be approximated to one dimension, and then captured with a generalized Ohm’s Law using a complex impedance. Methods can include time-dependent electrothermal pulses and feedback due to self-heating, with solutions readily carried out on any desktop computer.
While the selection of components in electrical equipment plays a crucial role, a sound understanding of the characteristics of safety-critical and high-integrity components can provide valuable information about the ways to advance and achieve safety goals.
Product regulatory compliance is a formal discipline that addresses every aspect of the product lifecycle, helping to ensure global acceptance of new and innovative technologies that are environmentally sound and safe to use.
