ONLINE ISSUE

July 2023

Inside This Issue

In-Situ Radiated Emission Testing of Large Systems Installations

When it comes to in-situ radiated emission measurements, the combination of near- and far-field measurements is often the best approach.

ANSC C63 Committee on EMC: A 2023 Status Report

This article is intended to cover recent operations of the ANSC C63 Committee, including an announcement of a Chairmanship change and detailed descriptions of the most recently released C63 Standards.

(Re)Discovering the Lost Science of Near-Field Measurements – Part 1

This article is the third in a series commemorating 70 years since the advent of modern EMI testing. But this last article is itself divided into multiple parts, due to the topic’s complexity.

Far-Field Criterion for Wire‑Type Antennas

This article presents the derivation of the far-field criterion for two fundamental wire-type antennas: electric (or Hertzian) dipole and magnetic dipole.
- From Our Sponsors -

The Dilemma Between Customers and Suppliers on EOS Failures

During the last four decades, damage to devices from electrical overstress (EOS) has confounded both IC suppliers and customers. The Industry Council on ESD Target Levels investigated numerous EOS root causes and established a white paper on the subject, JEP174 [1].

ANSI Z535.1 – Safety Colors in Focus

In our "On Your Mark" columns, we often discuss the importance of American National...

Banana Skins – July 2023 (#429-432)

One car manufacturer found that the craze for CB radio caused more than a jamming of the airwaves.

System Components Used to Reduce Electromagnetic Interference

A few basic system components are frequently used to mitigate or suppress electromagnetic interference (EMI) in devices. As engineers and technicians involved in compliance engineering, it is important to know what these components are, what they do, how they’re most effective, and when they’re ineffective.
- From Our Sponsors -

Featured in the Technical Library

Loading issues...

Discover new products, review technical whitepapers, read the latest compliance news, and check out trending engineering news.

Get our email updates

Popular Articles

The Grounding Symbols

With the various markings available to identify ground terminals, how do you know which symbol should be used? This column will outline the best practices for the use of earthing (grounding) symbols and markings.
→

Users Guide to Hipot Testing

Hipot (“high potential”) electrical safety testers produce high voltage to perform dielectric withstand and insulation resistance tests. This article discusses the safety considerations and capabilities of modern hipot testers that utilize electronic source technology to assess compliance with IEC-61010.
→

Sleeve Dipole Antenna Design and Build

This article describes a practical approach to the design and build of a sleeve dipole antenna mandated by a custom EMC standard.
→

Smith Chart and Voltage Standing Wave Ratio

This article explains how to use a Smith Chart to determine the voltage standing wave ratio (VSWR).
→

Eye Diagram

This is the first of two articles devoted to an eye diagram. In this article, the fundamental definitions and concepts are presented.
→