Glossary

AJAX progress indicator
Search: (clear)
  • m

  • MIL-PRF 87893
    Defines the requirements for ESD protective workstations
  • MIL-PRF-81705
    Defines requirements for ESD protective flexible packaging materials.
  • MIL-STD-129
    Covers procedures for marketing and labeling ESD sensitive items.
  • MIL-STD-1686C
    This military standard establishes requirements for ESD Control Programs. It applies to U.S. military agencies, contractors, subcontractors, suppliers and vendors. It requires the establishment, implementation and documentation of ESD control programs for static sensitive devices, but does NOT(...)
  • MIL-STD-461 F
    This standard establishes interface and associated verification requirements for the control of the electromagnetic interference (EMI) emission and susceptibility characteristics of electronic, electrical, and electromechanical equipment and subsystems designed or procured for use by(...)
  • MIL-STD-461 F CE101
    This test procedure is used to verify that electromagnetic emissions from the EUT do not exceed the specified requirements for power input leads including returns.
  • MIL-STD-461 F CE102
    This test procedure is used to verify that electromagnetic emissions from the EUT do not exceed the specified requirements for power input leads including returns.
  • MIL-STD-461 F CE106
    This test procedure is used to verify that conducted emissions appearing at the antenna terminal of the EUT do not exceed specified requirements.
  • MIL-STD-461 F CS101
    This test procedure is used to verify the ability of the EUT to withstand signals coupled onto input power leads.
  • MIL-STD-461 F CS103
    This test procedure is used to determine the presence of intermodulation products that may be caused by undesired signals at the EUT antenna input terminals.
  • MIL-STD-461 F CS104
    This test procedure is used to determine the presence of spurious responses that may be caused by undesired signals at the EUT antenna input terminals.
  • MIL-STD-461 F CS105
    This test procedure is used to determine the presence of cross-modulation products that may be caused by undesired signals at the EUT antenna terminals.
  • MIL-STD-461 F CS106
    This test procedure is used to verify the ability of the EUT to withstand transients coupled onto input power leads.
  • MIL-STD-461 F CS109
    This test procedure is used to verify the ability of the EUT to withstand structure currents.
  • MIL-STD-461 F CS114
    This test procedure is used to verify the ability of the EUT to withstand RF signals coupled onto EUT associated cabling.
  • MIL-STD-461 F CS115
    This test procedure is used to verify the ability of the EUT to withstand impulse signals coupled onto EUT associated cabling.
  • MIL-STD-461 F CS116
    This test procedure is used to verify the ability of the EUT to withstand damped sinusoidal transients coupled onto EUT associated cables and power leads.
  • MIL-STD-461 F RE101
    This test procedure is used to verify that the magnetic field emissions from the EUT and its associated electrical interfaces do not exceed specified requirements.
  • MIL-STD-461 F RE102
    This test procedure is used to verify that electric field emissions from the EUT and its associated cabling do not exceed specified requirements.
  • MIL-STD-461 F RE103
    This test procedure is used to verify that radiated spurious and harmonic emissions from transmitters do not exceed the specified requirements.
  • MIL-STD-461 F RS101
    This test procedure is used to verify the ability of the EUT to withstand radiated magnetic fields.
  • MIL-STD-461 F RS103
    This test procedure is used to verify the ability of the EUT and associated cabling to withstand electric fields.
  • MIL-STD-461 F RS105
    This test procedure is used to verify the ability of the EUT enclosure to withstand a transient electromagnetic field.
  • Mismatch
    The condition whereby the output impedance of the RF source differs from that of the load is said to be a “mismatch.”
  • Modulation
    The process of varying one or more properties of a periodic waveform, called the carrier signal, with a modulating signal which typically contains information to be transmitted.
  • Monopole Antenna
    A class of radio antenna consisting of a straight rod-shaped conductor, often mounted perpendicularly over some type of conductive surface, called a ground plane.
  • MOSFET
    Metal–oxide–semiconductor field-effect transistor. a transistor used for amplifying or switching electronic signals.
  • Mutual Capacitance
    intentional or unintentional capacitance that occurs between two charge-holding objects or conductors, in which the current passing through one passes over into the other
  • Mutual Inductance
    the change in current in one inductor induces a voltage in another nearby inductor
  • n

  • Narrowband Emission
    An emission that has a spectral energy distribution that is narrow compared to a referenced bandwidth, such as that of the suseptible receptor or the measuring receiver. This is usually defined using the 3 dB bandwidths. The unit for narrowband signal measurements using EMI receivers is(...)

X