Glossary

AJAX progress indicator
Search: (clear)
  • i

  • IEC 60695-9-2
    Presents a summary of published test methods that are used to determine the surface spread of flame of electrotechnical products or materials from which they are formed. It represents the current state of the art of the test methods and, where available, includes special observations on their(...)
  • IEC 60704-1
    Applies to electric appliances (including their accessories or components) for household and similar use, supplied from mains or from batteries
  • IEC 60709
    Defines the technical requirements to be met for I&C systems important to safety and their cables, in order to achieve adequate physical separation between redundant sections of a system and between a system and another system.
  • IEC 60713
    Presents a set of software subroutines to provide a general capability for communications with CAMAC systems as defined in IEC 60516
  • IEC 60730-2-22
    Applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including heating, air conditioning and similar applications as well as for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is considered(...)
  • IEC 60737
    IEC 60737:2010 deals with specific requirements for nuclear applications of temperature sensors. It provides guidance which will help to ensure that the reactor conditions do not damage the temperature sensors; it ensures that the in-core temperature measuring system and the sensor(...)
  • IEC 60754-1
    Specifies the apparatus and procedure for the determination of the amount of halogen acid gas, other than hydrofluoric acid, evolved during the combustion of compounds based on halogenated polymers and compounds containing halogenated additives taken from electric or optical fibre cable(...)
  • IEC 60754-2
    Specifies the apparatus and procedure for the determination of the potential corrosivity of gases evolved during the combustion of materials taken from electric or optical fibre cable constructions by measuring the acidity (pH) and conductivity of an aqueous solution resulting from the gases(...)
  • IEC 60761-1
    Lays down mandatory general requirements and gives examples of acceptable methods for equipment for continuous monitoring of radioactivity in gaseous effluents. Specifies general characteristics, general test procedures, radiation, electrical, safety and environmental characteristics and the(...)
  • IEC 60761-2
    Establishes specific standard requirements, including technical characteristics and general test conditions, and gives examples of acceptable methods for aerosol effluent monitors.
  • IEC 60761-3
    Lays down specific standard requirements, including technical characteristics and general test conditions, and gives examples of acceptable methods for noble gas effluent monitors.
  • IEC 60761-4
    Lays down specific standard requirements, including technical characteristics and general test conditions, and gives examples of acceptable methods for iodine monitors.
  • IEC 60761-5
    Establishes specific standard requirements, including technical characteristics and general test conditions and gives examples of acceptable methods for the tritium effluent monitors.
  • IEC 60768
    IEC 60768:2009 provides criteria for the design, selection, testing, calibration and functional location of equipment for the monitoring of radioactive substances within plant-process streams during normal operation conditions and anticipated operational occurrences. Is only applicable to(...)
  • IEC 60770-3
    This standard specifies methods for: - assessment of the functionality of intelligent transmitters; - testing the operational behaviour, as well as the static and dynamic performance of an intelligent transmitter and methodologies for determining the reliability and diagnostic features used(...)
  • IEC 60772
    Applies to cable penetrations in reactor containments. Covers the engineered safety requirements to be in the design, calculation, fabrication, assembly, testing, installation and maintenance of cable penetrations. Describes the requirements for the design, construction, test and installation(...)
  • IEC 60775
    Applies to CAMAC systems as defined in IEC 60516. The generic standard for BASIC includes a real-time enhancement which is necessarily general. This standard defines specific syntax and semantics for use with CAMAC.
  • IEC 60780
    Describes successively the general qualification process, the qualification procedures and methods to be used and the associated documentation. Is applicable to electrical equipment of safety systems used in nuclear power plants.
  • IEC 60794-4-10
    IEC 60794-4-10:2014 which is a family specification, covers cable construction, test methods and optical, mechanical, environmental and electrical performance requirements for OPGW (optical ground wire) which is used for the protection of electrical power lines against atmospheric discharges(...)
  • IEC 60825-1
    Applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. A laser product may consist of a single laser with or without a separate power supply or may incorporate one or more lasers in a complex optical, electrical, or mechanical system.
  • IEC 60832-1
    Gives the essential requirements for insulating sticks for live working for use on a.c. electrical installations. The products designed and manufactured according to this standard contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods(...)
  • IEC 60832-2
    Gives the essential requirements for devices that can be attached onto and removed from the fitting of the insulating sticks for live working, for use on a.c. electrical installations.
  • IEC 60839-10-1
    Specifies requirements and test methods for vehicle security alarm systems in tended for installation within vehicles used for the carriage of passengers and having not more than eight seats in addition to the driver's seat.
  • IEC 60839-11-1
    Specifies the minimum functionality, performance requirements and test methods for electronic access control systems and components used for physical access (entry and exit) in and around buildings and protected areas.
  • IEC 60839-5-1
    Specifies the general requirements for the performance, reliability and security characteristics of alarm transmission systems. Covers the general requirements for connections providing signalling between an alarm system and an alarm receiving centre.
  • IEC 60839-5-2
    Specifies the general requirements for equipment used in alarm transmission systems. Does not specify the equipment used to display the information at the alarm receiving centre or the installation of the equipment.
  • IEC 60839-5-4
    Specifies the requirements for alarm transmission systems using dedicated alarm transmission paths which are additional to those specified in IEC 60839-5-1 and IEC 60839-5-2. Covers dedicated connections providing signalling continuity between an alarm system and the presentation of alarm(...)
  • IEC 60839-5-5
    Specifies the requirements for digital communicator systems using the public switched telephone network which are additional to those specified in IEC 60839-5-1 and IEC 60839-5-2. Covers switched connections providing event driven signalling between an alarm system and a remote centre.
  • IEC 60839-5-6
    Specifies the requirements for voice communicator systems using the public switched telephone network which are additional to those specified in IEC 60839-5-1 and IEC 60839-5-2. Covers switched connections providing event driven signalling between an alarm system and a remote centre.
  • IEC 60839-7-1
    Describes the requirements for standard serial data interfaces in alarm transmission systems. Gives an outline of how alarm transmission systems are connected and the various types of serial data interfaces that might be employed.

X