Free webinar about conducted emissions and modal noise measurements in electronic products
We would like to invite you to our free webinar and live demonstration “Conducted Emissions And Modal Noise Measurements: How To Analyse And Solve Problems In Your Electronic Devices“.
OVERVIEW
This webinar will consist of a real measurement dedicated to explaining the basic strategy to debug and solve conducted emissions in electronic products using the strategy of separating differential (DM) and common-mode (CM) components so an optimum filter can be prepared to pass the tests. The measurements will be carried out with the innovative EMSCOPE, a new Modal EMC Dual Receiver.
DURATION
1 hour (45 minutes presentation + 15 min Q&A session)
OUTLINE
- Fundamentals of EMC conducted emissions: basic setup
- EMI modes: DM vs CM
- Live demonstration: a real electronic circuit will be evaluated to show how a product is failing in conducted emissions. Then, the DM and CM will be identified using the EMSCOPE and an optimum filter will be designed and tested to solve the problem.
- Q&A session
SPEAKER
Arturo Mediano received his MSc. (1990) and his Ph.D. (1997) in Electrical Engineering from the University of Zaragoza (Spain), where he has held a teaching professorship in EMI/EMC/RF/SI since 1992. He is the founder of The HF-Magic Lab®, a specialized laboratory for design, diagnostic, troubleshooting, and training in the EMI/EMC/SI and RF fields at I3A (University of Zaragoza). |
