“Tell me and I forget, teach me and I remember, involve me and I learn.” –Benjamin Franklin
The start of a new year is a time when we usually reflect on the progress we’ve made during the past year and set our goals for the year ahead. More often than not, your professional development goals include training or some form of higher education to expand or refresh your technical knowledge. We’ve queried our training contacts and resources from across the compliance industry and compiled in this article a wide range of options to help you meet your own professional development goals in 2016, including both public and custom workshops and seminars, offered in person and online.
Electromagnetic Compatibility and Electrostatic Discharge
Altair offers three-day training on FEKO, a comprehensive electromagnetic simulation software suite. The courses include a presentation and hands-on exercises. Details are available at www.feko.info/support/training-and-courses.
Bruce Archambeault will teach several seminars in 2016. Check www.brucearch.com for details.
PCB Design Seminar for Real-World EMI Control
This seminar is designed for working engineers involved in PCB level design during the product development process. Proper EMC design is critical for product success and can have little to no impact on the company when done properly. EMC is not magic! Dr. Archambeault will break down the science, provide the latest insights, and you can directly apply it in the lab.
Advanced EMC & Signal Integrity Performance
This course goes beyond the basics to help understand the fundamental physics involved and to be able to make trade off decisions when the normal rules-of-thumb cannot be applied. The rules-of-thumb will help engineers make the correct decisions, but often the ‘shades of grey’ between the absolute black and white extremes are desired. This seminar will examine these grey areas and provide guidance to help engineers make the difficult trade off decisions.
D.L.S Electronics Systems, Inc. offers a two-day applications seminar and one day workshop.
EMC By Your Design: A Practical Applications Seminar and Workshop
Using updates of the latest developments in research, standards, regulations, instrumentation and services, participants will study EMC design techniques and the calculations required to design a product to meet compliance regulations. After two days of intense study of EMC and design principles, students in the workshop will design, from start to finish, an EMC compliant product. The goal of this workshop is to help design engineers and technicians learn to apply the EMC design principles they learn in the seminar to real life products. April 12-14, 2016 and October 4-6, 2016 in Northbrook, Illinois. Visit www.dlsemc.com/emc-class/emc-seminar.htm to learn more.
Doug Smith is adding a vendor show and other features to his course this year. He says, “If taken after a conventional EMC seminar, it would increase understanding of the previously taken seminar significantly due to the extensive demos I use and simple explanations of phenomena.” Find details at http://emcesd.com/#BoulderCity.
Design Troubleshooting, EMC, and ESD
This three day seminar takes the best points from Doug Smith’s seminars and compresses them into three action packed days with lecture, video, and many demonstrations on live circuits. Time is allowed for attendees to operate the experiments if they want. In two days, you will learn how to make accurate measurements in the lab and then apply those techniques to design verification and troubleshooting as well as EMC problems. The techniques and experiments are geared to the development lab and common equipment found there. During an optional third day, ESD/EMI at the system level will be covered as well as applying system level ESD stress to components, such as LEDs, in a test environment. February 22-24, 2016 in Boulder City, Nevada
The ESD Association holds educational opportunities throughout the year to provide engineers with the knowledge and tools needed to meet the challenges of ESD in their companies. For example, the association co-sponsors regional tutorials with local chapters, conducts a national tutorial and education seminar in conjunction with the annual EOS/ESD Symposium, and publishes and distributes numerous educational materials on ESD. For full details, visit the ESD Association’s website at www.esda.org.
ETS-Lindgren offers hands-on training courses in Cedar Park, Texas, throughout the year. Below is a list of those courses currently scheduled through ETS-U. Learn more at www.ets-lindgren.com/learning.
Fundamentals of EMC Testing
With a mix of classroom discussion and practical in-chamber testing, you’ll learn firsthand how to perform radiated and conducted emissions and immunity tests according to published standards. You’ll also receive a study guide and class notes so you can focus on learning, instead of taking notes. The study guide is a valuable reference tool you’ll refer to often when you return to your lab. March 16, June 13, and November 15, 2016
This new two-day hands-on course designed for engineers or lab technicians who want to expand their knowledge of the latest version of the TILE! ™ (Totally Integrated Laboratory Environment) software, either as a new user or a current user wanting to improve their skills. Instruction is divided between class lectures and hands-on lab experience. Students are taught how to create profiles, use the Profile Launcher, Instrument Simulator and perform actual tests in a lab environment. Students receive an illustrated textbook written specifically for the TILE! training course. Upon completion, attendees of this class will be able to: create a test profile from a blank sheet, use existing test profiles, manage instruments, manage data, generate reports, and customize the Launcher to create a ‘1 click’ process from starting a test to the report generation. January 26-27, October 4-5, 2016
Introduction to Antenna Pattern Measurement & Wireless OTA Testing
You’ll learn firsthand how to perform Antenna Pattern Measurements (APM) and Wireless Over-The-Air (OTA) tests with mix of classroom discussion and practical in-chamber testing. You’ll also receive a study guide and class notes. February 23-25, September 13, 2016
Fundamentals of EMC & MIL STD 461
Designed for engineers or lab technicians who want to expand their knowledge of EMC compliance testing and Military-Standard 461F testing or are new to the subject and want to “learn-how” quickly. Instruction is divided between class lectures and hands-on lab experience. Students are taught how to perform actual tests. On the EMC side, that includes a 3 meter anechoic chamber, GTEM and a reverberation chamber. On the MIL-STD side, that includes a semi-anechoic chamber and a conducted susceptibility test station. June 13-17, 2016
Introduction to Antenna Pattern Measurement & Wireless OTA Testing
Learn how to perform Antenna Pattern Measurements (APM) and Wireless Over-The-Air (OTA) tests. This course has a mix of classroom discussion and practical in-chamber testing, and includes a study guide and class notes. September 13-15, 2016
Henry Ott Consultants offers a three-day course covering the practical aspects of noise and interference control in electronic systems. More information is available on the Henry Ott Consultants website, (www.hottconsultants.com), both on the public and in-plant EMC courses.
Electromagnetic Compatibility Engineering
This course will provide the participants with a working knowledge of electromagnetic compatibility principles. Emphasis is on cost effective EMC design for digital systems. The commercial and industrial aspects of EMC Engineering are emphasized. The amount and complexity of mathematics will be kept to a minimum, and ideas will be illustrated with examples of actual case histories.
Kimmel Gerke Associates will continue the legacy of EMC training with several public seminars in 2016. These classes and others are also available in-house. For more information, please go to www.emiguru.com.
Design for EMC & Signal Integrity
This popular two-day introductory class has been co-hosted by Kimmel Gerke Associates and Tektronix since 1992. The focus is “inside the box” – components, printed circuit boards, power electronics, grounding, and shielding. Addresses five key EMI threats – emissions, ESD, RF immunity, power disturbances, and self-compatibility among analog/digital/power circuits. Minimal math – useful rules of thumb – numerous case histories. Includes over practical 30 EMI design fixes. An optional day on EMI Troubleshooting is offered at select locations.
EMC in Military Systems
This is a new three-day introductory class offered through the Applied Technology Institute (www.aticourses.com.) The focus is “outside the box” – grounding, power, cables, and shielding. Addresses the four key military EMI concerns – radiated emissions (RE), conducted emissions (CE), radiated susceptibility (RS), conducted susceptibility (CS). Minimal math – useful rules of thumb – numerous case histories. Includes over 30 practical EMI systems fixes. An overview of MIL-STD-461/464 design impact, along with systems troubleshooting are included.
MET Laboratories Compliance College offers seminars at various locations throughout the year. Visit www.metlabs.com for additional details.
- Electro-Medical Compliance Seminar on January 19, 2016, in Austin, Texas
- Product Design Symposium on February 9, 2016, in Santa Clara, California
- NEBS/Data Center Seminar on May 5, 2016 in Santa Clara, California
- Hazardous Location Seminar on July 19, 2016, in Houston, Texas
- Global Compliance Seminar & Crab Feast on September 15, 2016, in Baltimore, Maryland
Montrose Compliance Services will teach a University of California Santa Cruz Extension course this year. Find details at www.montrosecompliance.com/training-seminars/seminars_courses.
Printed Circuit Board Design for Signal Integrity and EMC Compliance
This course presents simplified design techniques for the design and layout of PCBs to achieve signal integrity and EMC) for experienced and junior engineers. June 4 and 11, 2016, in Santa Clara, California
The University of Oxford has several courses in their department for continuing education that are appropriate for compliance engineers. Learn more at www.conted.ox.ac.uk/courses/professional/index.php. In addition to the courses described below, they also offer courses on: Signal and Power Integrity, Power Distribution Networks, and Data Converters.
High Frequency Measurements
Discover measurement techniques, PCB/PWB and chip package design, signal integrity design and troubleshooting. Electronic engineers from all fields will find this course useful. June 7-8, 2016, University of Oxford, UK
EMC and ESD Lab Techniques for Designers
Explore advanced techniques for troubleshooting design problems in the laboratory and field installations. Emphasis is on delivering practical knowledge that can be used immediately on the job. June 9-10, 2016, University of Oxford, UK
Printed Circuit Board (PCB) Design for Real-World EMI Control
Understand the causes of EMC problems and apply it to real world product design immediately. June 14-15, 2016, University of Oxford, UK
Advanced EMC: Fullwave Modelling for EMC and Signal Integrity
Discover and validate the strengths and weaknesses of full-wave simulation techniques and apply these to real-world SI and EMC problems. June 16-17, 2016, University of Oxford, UK
Silent Solutions offers workshops for design engineers interested in a practical, hands-on approach to EMC design, troubleshooting, and the special field concerned with Circuit-to-Circuit Interference. Engineers working for manufacturers whose products target commercial and industrial environments will find this training extraordinarily useful. Visit www.silent-solutions.com to learn more.
Electronic Product Design & Retrofit for EMC
This two-day EMC course presents a unique blend of applications, hardware demonstrations, and supporting theory to help design engineers and EMC engineers master key electrical noise reduction techniques.
- April, 2016 in Milpitas, California
- May 10-13, 2016, in Westford, Massachusetts
- October, 2016, in Westford, Massachusetts
- November, 2016 in Milpitas, California
Washington Laboratories Academy will be offering a range of training opportunities in 2016, including the very popular and often sold-out MIL-STD-461 (updated for Revision G) training. As always, the engineering community can take advantage of its core training offerings in EMC Design and Mitigation. Other offerings will focus on Wireless Regulatory topics, including International Approvals for RF devices, Simulation, Nuclear EMC, Shielding Design, Environmental Testing and Design, Electrical Safety Evaluation and Design and breaking topics in Engineering Reliability and Maintainability.
Served up in-house, on the road and on the web and teaming with its slate of expert instructors, WLA delivers the best selection and options for engineering development. In the coming twelve months, the Academy will expand its partner opportunities to support the engineering community with the finest in professional development.
Contact Steve Ferguson (stevef @wll.com) for more information, or visit the Washington Laboratories Academy at www.wll.com/academy.
Wyatt Technical Services offers several public and private seminars on product design for EMC compliance, troubleshooting, and pre-compliance testing throughout the year. For more information, go to www.emc-seminars.com.
My Product failed EMC Testing – Now What Do I Do?
This special presentation will be based on the book, EMI Troubleshooting Cookbook for Product Designers, by Patrick André and Kenneth Wyatt. You will learn how to use simple and low cost EMC tools and troubleshooting techniques to evaluate common EMC test failures In addition, you’ll learn simple bench top pre-compliance testing that may be performed in-house prior to compliance testing. January 19, 2016, at DesignCon 2016 in Santa Clara, California.
At this five-day week of intensive EMC education, Kenneth will be a featured presenter, along with EMC experts Doug Smith and Derek Walton. They’ll be covering product design for compliance, EMC compliance testing, EMC troubleshooting, and simple pre-compliance testing that may be performed in-house prior to compliance testing. In addition, several key vendors will be invited to show their products. Find more info at www.emcesd.com. February 22-26, 2016, in Boulder City, Nevada.
In this two-day seminar with demos, you’ll learn simple EMC theory, how to design products and printed circuit boards for EMC compliance, EMC troubleshooting, and simple pre-compliance testing that may be performed in-house prior to compliance testing. April 5-6, 2016, in Longmont, Colorado.
York EMC offers classroom compliance training throughout the year. Find out more at www.yorkemc.co.uk/cpd_and_training.
Fundamentals of Design and Testing for EMC
Fundamentals of Design and Testing for EMC is a highly recommended, unique five day course that will provide you with the essential knowledge required to help manage EMC and achieve EMC assurance for complex projects or for EMC product compliance. April 25–29, 2016 in York, England.
EMC Directive and Technical Documentation Workshop
In this one day course, gain a full understanding of the EMC Directive, the supporting standards and implications of the NLF.
- January 20 and March 16, 2016 in Bristol, England
- May 20, 2016 in Grangemouth, England
- June 7, 2016 in Castleford, England
Product Safety and Environmental Testing
AEMC Instruments offers the Understanding Ground Resistance Testing Training Seminar. This one-day technical training seminar consists of two sessions. The first session consists of classroom presentations and discussions on all aspects of soil resistivity and ground resistance testing. The second session consists of on-site field tests demonstrating the different methods of ground resistance testing discussed during the first half of the day. Participants will have the opportunity for hands-on experience and demonstrations of proper testing procedures including measurement of soil resistivity, correct placement of test rods, using the 3-Point method and proper use of the clamp-on test method. For additional details, visit www.aemc.com/techinfo/seminars/ground_resistance_testers/ground-seminar-listings.html.
- March 1, 2016 in Tucson, Arizona
- April 5, 2016 in Portland, Oregon
- May 10, 2016 in Pittsburgh, Pennsylvania
- June 7, 2016 in Nashville, Tennessee
- September 13, 2016 in Charlotte, North Carolina
- October 4, 2016 in Houston, Texas
The American Association for Laboratory Accreditation (A2LA) provides a variety of courses designed to help organizations achieve and maintain accreditation to international standards. Instructors are subject matter experts with many years of professional training experience. Most courses are offered at several locations on various dates throughout the year. Details are at www.a2la.org/training. Some of the topics covered are:
- Applied Measurement Uncertainty for Testing Labs
- Evaluating Measurement Data to Avoid Decision Risk
- ISO 15189:2012 and CLIA Clinical Laboratory Accreditation
- ISO Guide 34:2009 and Accreditation for Reference Material Producers
- ISO/IEC 17020:2012 and 17025:2005
- Proficiency Testing: ISO/IEC 17043 and ISO 13528
- Root Cause Analysis and Corrective Action
CST of America offers several public courses throughout the year, on topics such as signal integrity & power integrity and microwave & antenna training. Visit www.cst.com/events/trainings for descriptions and a course schedule.
Equipment Reliability Institute offers several public courses throughout the year. Visit www.equipment-reliability.com/training-calendar for more details about each course and to check as additional dates are added throughout the year.
Military Standard 810G (MIL-STD-810G) Testing
This course focuses on the purpose of each test, the equipment required to perform each test, and the methodology to correctly apply the specified test environments. January 25 and January 28, 2016 at NTS in Tinton Falls, New Jersey.
Random Vibration and Shock Testing
Basic vibrations, sources and causes, vibration measurements, analysis and calibration. Discussion is supported by projected visuals and video clips. February 16 and February 18, 2016 at Waterfront Center in Santa Barbara, California.
O’Brien Compliance Management offers a training course in IEC 60601, the medical electrical equipment standards for basic safety and essential performance. A brief description and dates and locations are below. For further details, visit www.obcompman.com/training.
Integrating Medical Device Safety into the Design Process: IEC 60601/ISO 80601, ed 3.1 and 2.2 families
This is an intense three-day training course. There are presentation slides, frequent references to source standards, and skill implementation work group exercises. Participants are encouraged to ask questions about the safety requirements, and how they apply to products currently under development. The course continues to evolve to stay up to date with latest standards, interpretations, regulatory guidance, and feedback from over 1,000 past participants.
- April 5 -7, 2016, in Galway, Ireland
- May 10 – 12, in Amsterdam, Netherlands
- June 21 -23, in the California Bay Area
- Oct 18 – 20, in Boston, MA
TÜV SÜD Academy public training courses are enhanced by the real life experiences of the auditing and testing teams, offering years of experience in the worldwide international standards arena. With complete one-, two-, three- and five-day training courses offered, the Academy can get you prepared for the most challenging compliance issues.Visit their website to see the latest training schedule: www.tuv-sud-america.com/us-en/resource-center/training.
UL Knowledge Solutions offers several courses in 2016. In a world of emerging risks, knowledge is a competitive advantage that drives tangible results, empowering people, protecting lives, and driving business success. The world’s most progressive and safety-conscious companies rely on UL’s educational programs for the expertise and tools required to design and install safer products, increase efficiency, realize improved speed to market, and ultimately advance their approach to prevention and compliance. We include a few examples here. A full listing of 2016 dates and locations is available at lms.ulknowledgeservices.com/home.aspx.
Functional Safety Training
Whenever safety depends on the correctness of certain functionality, be this the flap control in an aircraft, the flame detection in a burner furnace, or the lid interlock of a washing machine, a case of “functional safety” is present. To achieve and demonstrate functional safety is particularly challenging, especially if such functionality is implemented in complex microelectronics and software.
The CE Marking: Strategies for European Compliance
This two-day workshop is designed to give you essential information about the European regulatory system and step-by-step instructions on how to develop a compliance strategy fit for your needs.
Globalability: The Key to International Compliance
Spend two days with UL to learn how to identify and comply with product regulations in your key international markets, and then leverage the similarities and differences among those markets to develop a compliance strategy.
Foundations of 3D Printing Workshop & Technology Demo
A full-day workshop providing introductory knowledge of the 3D printing industry and related technologies. The Technology Demo features 3D printing software, material, printers and post-processing techniques.
Designing for Compliance to UL 60730: Automatic Electrical Controls for Household and Similar Use
This two-day workshop provides participants the opportunity to learn the key points of UL 60730. Participants will also be able to identify the key differences between UL 60730 and IEC 60730 after completing the course.
Washington Laboratories Academy offers Product Safety Seminars throughout the year. Visit them online at www.wll.com/academy for locations and dates.
Many experts offer private seminars designed to train select personnel at your location. These seminars offer companies an opportunity to train multiple compliance personnel with a customized approach designed for their needs. Following is a list of experts who offer private seminars.
A2LA (www.a2la.org) has custom and on-site courses available on a variety of topics.
Best ESD Technical Services (www.bestesd.com): Classes and seminars can be arranged on different topics – from basic introduction to highly-specialized classes on a particular subject of ESD or EMC/EMI relevant to your applications.
Cherry Clough Consultants (www.cherryclough.com): Seminars allow for a customized approach to training in basic and advanced EMC design, the EMC Directive and EMC engineering practices for EMC testing techniques and EMC functional safety.
DLS Electronics Systems (www.dlsemc.com/emc-class/emc-seminar.htm): DLS experts offer practice oriented seminars and workshops on EMC design and regulatory compliance issues.
Don Heirman Consultants (www.donheirman.com) holds workshops and tutorials on topics such as C63 standards and on testing emissions from unlicensed wireless devices.
Henry Ott Consultants (www.hottconsultants.com) offers one to three day EMC seminars (in plant and public) on over 25 different topics, including “Partitioning and Layout of Mixed-Signal PCBs” and EMC Considerations in Switching Power Supply Designs.”
Kimmel Gerke Associates, Ltd. (www.emiguru.com) offers seminars on EMC design fundamentals and techniques for ensuring EMC Compliance.
Montrose Compliance Services (www.montrosecompliance.com) offers customized in-house training programs on achieving EMC compliance, EMC design fundamentals and techniques. Mark Montrose also recently released a new book called EMC Made Simple-Printed Circuit Board and System Design.
Silent Solutions (www.silent-solutions.com) draws from its deep understanding of hardware-focused research from the University of Missouri-Rolla’s EMC Laboratory to tailor-make a seminar that’s right for your organization or special event.
Van Doren Company (www.emc-education.com) provides education on how to diagnose and reduce electrical interference problems.
Wyatt Technical Services, LLC (www.emc-seminars.com), an independent consulting firm that specializes in EMC design, troubleshooting and training services to commercial and industrial manufacturers with global distribution in the consumer, computer, network & telecommunications, industrial and scientific industries.
York EMC (www.yorkemc.co.uk) provides bespoke and in-house training.
Since you can’t be on the road all the time, there is plenty of training that you can participate in right from your desk. Many experts provide live and on-demand webinars, as well as books, podcasts, and eLearning programs. Here are a few options to get you started.
Altair (www.altairhyperworks.com/TrainingHome.aspx) has virtual led training and self-paced training available online.
Associated Research (www.asresearch.com/events-training/webinars.aspx) offers webinars that provide detailed information on many aspects of electrical safety testing.
CST of America (www.cst.com/events/webinars) offers webinar programs throughout the year that focus on design challenges across the field of electrical engineering, in microwaves and RF, EMC, EDA and charged particle dynamics.
EMC Fast Pass provides comprehensive training courses to assist electronic engineers, compliance specialists, and hardware manufacturers to design and test products that pass EMC and RF certifications the first time. For more information visit www.emcfastpass.com.
- EMC Troubleshooting and Pre-Compliance Testing
Learn the tools and techniques used for EMC troubleshooting and pre-compliance testing (emission + immunity) with in depth training from the widely respected EMC expert, Kenneth Wyatt. Includes lessons and demonstration videos. Start Date: March 23, 2016.
Equipment Reliability Institute (www.equipment-reliability.com) offers Distance Learning, where student can study at home, viewing lessons and taking tests at their own pace. Additionally, Wayne Tustin’s 3-day lecture is available on Blu-ray. Show it to the newbie or to your whole team.
The ESD Association hosts online classes and training videos at www.esda.org/training-and-education.
Intertek Academy (www.intertek.com/training) offers educational opportunities in quality, safety and energy efficiency to provide in-depth guidance for understanding new standards and specs, innovative techniques and compliance.
Kimmel Gerke Associates (www.emiguru.com) offers webinars throughout the year.
MET Laboratories (www.metlabs.com/News-and-Events/Seminars-and-Webinars.aspx) offers webinars throughout the year and also offers on-demand viewing of past webinars.
Oxford University offers a free online course: High-speed digital design by Howard Johnson. The course is available now at www.conted.ox.ac.uk/courses/howardjohnson.
Phoenix Technical Group presents a digital learning series of technical books for the new regulatory engineer who needs a quick brief or as a reminder tool for the more experienced engineer. The Designers’ Guide Series™ grew out of a desire to create an Encyclopaedia Galactica for Product Safety. Written by Gregg Kervill based on over thirty years of experience, learn all you need to know about Grounding, Insulation Theory, Risk Assessment and much more. Easy to read formatted digital books are available through Amazon. For more information: www.phoenixtechnicalgroup.com
SIEMIC Regulatory Compliance Webinars (www.siemic.com/us/COMPANY/Webinars.php), a series of monthly one-hour presentations, these webinars will present the latest regulation changes, importation requirements, and hot compliance issues for the most important and dynamic market countries.
TÜV SÜD America (www.tuv-sud-america.com/us-en/resource-center/training/webinars) offers webinars and online seminars in the areas of Safety, EMC, management systems and competency assessments. Webinars are also available for on-demand viewing.
UL Knowledge Solutions (industries.ul.com/knowledge-solutions) provides safety- and compliance-related training delivered via self-paced online training, webinars, and more.
- Knowledge Regulatory and Compliance Essentials
This is a continuously growing portfolio of online courses spanning across a wide spectrum of topic areas including hazard-based safety engineering, global market access and global directives, code compliance, conformity assessment, sustainability, responsible sourcing and social auditing, and many more. Serving as a constant reference and resource library accessible at any time, clients are better equipped to keep pace with new technologies and regulations, advance their approach to risk management and risk prevention, and design, build and sell safer and more sustainable products around the world.
York EMC Services’ York Training Academy (YTA) is now offering Online Training Course Modules. (www.yorkemc.co.uk):
- Implications of the New EMC Directive
This online module delivers an overview of the New EMC Directive, 2014/30/EU, which is coming into force on 20th April 2016, replacing the current 2004/108/EC EMC Directive.
- Introduction to EMC Standards
This module provides an introduction to the world of EMC standards and is intended to help manufacturers understand the selection process, as well as ensuring that compliance is maintained by using the correct version of the standard.
Industry Symposia and Table-Top Programs
These annual symposia are an excellent resource for extensive technical training, and exchange of new ideas and technical concepts. The benefit of attending these events is that attendees can sample a vast array of workshops quickly and efficiently while networking with colleagues and professionals with the same interests.
February 23-25, 2016 – Duesseldorf , Germany
32nd International Review of Progress in Applied Computational Electromagnetics (ACES 2016)
March 13-17, 2016 – Honolulu, Hawaii
Microwaves & RF 2016
March 23-24, 2016 – Paris, France
Milwaukee EMC Society
April 5, 2016 – Milwaukee, Wisconsin
“Global Market Access – An In-Depth Study of GMA’s Technical and Administrative Challenges”
EuCAP 2016 – The 10th European Conference on Antennas and Propagation
April 10-15, 2016 – Davos, Switzerland
10th Annual International Electrostatic Discharge Workshop (IEW)
May 16-19, 2016 – Tutzing, Germany
2016 China International Exhibition on EMC, Microwave, RF and Safety Tests & Certification
(China EMC 2016/China MW 2016)
May 31-June 2, 2016– Beijing, China
IEEE Symposium on Product Compliance Engineering 2016 (PSES)
May 16-18, 2016 – Anaheim, California
2016 Asia-Pacific Electromagnetic Compatibility Symposium and Technical Exhibition
May 18-21, 2016 – Shenzhen, China
IMS2016 – 2016 International Microwave Symposium
May 22-27, 2016 – San Francisco, California
2016 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)
May 23-26, 2016 – Taipei, Taiwan
2016 IEEE International Symposium on Electromagnetic Compatibility
July 25-29, 2016 – Ottawa, Canada
38th Annual Electrical Overstress/Electrostatic Discharge Symposium
September 11–16, 2016 – Garden Grove, California
European Microwave Week 2016
October 3-7, 2016 – London, United Kingdom
38th Annual Symposium of the Antenna Measurement Techniques Association (AMTA)
October 30-November 4, 2016 – Austin, Texas
IEEE EMC Society 2016 Regional Events
2016 Chicago IEEE EMC Mini Symposium
May 3, 2016 – Chicago, Illinois
EMC Fest Detroit
May 20, 2016 – Livonia, Michigan
2016 Minnesota EMC Event
September 20, 2016 – Bloomington, MN
We hope this list will help you meet your professional development goals in 2016. Many additional events will be planned throughout the year, so be sure to check our events calendar at www.incompliancemag.com/calendar to find the most up-to-date information. Another way to brush up on the basics and delve deep into advanced topics is by visiting our new Electrical Engineering Resource Center, at www.incompliancemag.com/eerc. We invite you to submit your own suggestions for additional listings as we continue to update our events and resources throughout the year. Send your events to us at editor @incompliancemag.com.
Leave a Reply