Bonding - In Compliance Magazine

« Back to Glossary Index

The use of low-resistance material to electrically connect a chassis, metal shield cans, cable shielding braid, and other supposedly equipotential points to eliminate undesirable electrical interaction resulting from high-impedance paths between them.

Why Resistance Requirements Differ by Industry and Why Standards Matter
Confusion over ESD flooring resistance terminology and requirements abounds, leaving many in the dark and creating potential risks. This article helps to clarify this complicated issue so that you can work to mitigate the problem.
EMC and Safety for Installations: Part 2
In Part 2 of this two-part article, we’ll discuss the development and use of isolated bonding networks (IBNs).
EMC and Safety for Installations: Part 1
In Part 1 of this two-part article, we’ll discuss the development of “grounding networks” and the shift to meshed structures to reduce damage from overvoltages. Part 2 will appear in our November 2020 issue.
Even Optical Communication Needs ESD Protection
Optical communication can dramatically increase the bandwidth between servers while reducing complexity, power consumption, and cost.
Banana Skins – November 2020 (#295-301)
We are proud to carry on the tradition of sharing Banana Skins for the purpose of promoting education for EMI/EMC engineers.

« Back to Term Index